Assigning a static IP address

The printer is automatically assigned an IP address through DHCP on most networks.

1. Complete the wireless or Ethernet setup, allowing the printer to receive a DHCP address from a DHCP server on the network.

2. Print a network setup page to see the IP address currently assigned to the printer.

3. Open a Web browser, and then type the printer IP address in the address field. Press Enter.

   Note:

   If you are using a proxy server, then temporarily disable it to load the Embedded Web Server correctly.

4. Click Settings > Network/Ports > TCP/IP > Set static IP address.

5. In the Address field, type the IP address you want to assign to the printer, and then click Submit.

To verify, type the static IP address in the Web browser address field, and then press Enter.

For more information, contact your system support person.