Configuring the printer wirelessly using WPS (Windows only)

With Wi-Fi Protected Setup (WPS), it is easy to add computers or printers to your wireless network because the SSID and WPA passphrase are automatically detected and configured for you.

1. Make sure your access point (wireless router) supports WPS.

2. Insert the Printer Driver and Documentations CD and follow the instructions on the computer screen.

Notes:

• If you are using the PIN method to add your printer using WPS, then make sure you type all eight digits when you are asked to enter your PIN.
• To use WPS to configure the printer wirelessly, all of the devices on your wireless network must support WPS. If any device on your network does not support WPS, then you must type the SSID and security information when prompted.