FAQ
- Print
- Q1. If using Image Controller IC-602, is it possible to save document data from the computer tothe hard disk (HDD)?
- Q2. Once print settings are configured, do they need to be re-configured before being usedagain?
- Q3. How many documents can be saved on the HDD?
- Q4. Is there a way to print documents larger than A3-size without shrinking them?
- Q5. I did not retrieve the information of the optional device mounted although I set thecorrect IP Address of the optional device and press the device information button on the PS Plug-in driver.
- Q6. Perfect binding is not achieved by the perfect binder.
- Q7. I want to use the fold function using the PS Plug-in driver, but the function is notdisplayed.
- Q8. The same materials are printed two days in a row, but the colors are not the same.
- Application
- Q1. The colors are not correct.
- Q2. I measured a chart by using a colorimeter, but the color values are not accurate.
- Q3. If I changed a color by using the Alternative Color function, would it affect the overallcolor of the picture?
- Q4. What is a profile?
- Q5. What is an RGB profile?
- Q6. What is a CMYK profile?
- Q7. What is an output profile?
- Q8. What is a device link profile?
- Q9. Using Job Centro, is it possible to edit a job saved on the HDD (HDD job) and print it?
- Q10. I cannot edit the selected job or page using Job Centro.
- Q11. I edited a job on the touch panel and then edited it again using Job Centro. The job'ssettings reverted to the settings as they were at the time the job was saved.
- Q12. I can't print a job that I edited using Job Centro.
- Q13. Is there a way to print documents larger than A3-size without shrinking them?
- Q14. I can't print MS-Office files using PageScope Direct Print. What should I do?
- Q15. The correct IP address is entered, but I cannot view the content of the PageScope WebConnection.
- Q16. Now operating remotely is displayed on the screen and the machine cannot be operated.
- Q17. How do I access Web Utilities?
- Q18. Can I operate the main body's touch panel screen remotely from a computer?
- Scan
- Q1. Is the favorite setting available in the scan function?
- Q2. What is the difference between Packed PDF and Divided PDF?
- Q3. What is a print queue?
- Q4. The available options for Zoom are 25% to 100%. Is it possible to enlarge and scan?
- Q5. The registered destinations are not displayed in ascending order.
- Q6. Scan data is not successfully sent to the destination.
- Q7. Scan to SMB is not available on Mac OS 10.7.
- Q8. File Name cannot be selected from the left side of the SCAN screen.
- Settings and Adjustments
- Q1. Can I change the screen displayed first when the machine is turned on?
- Q2. Can I make a Hold Job be automatically deleted after a certain amount of time haselapsed?
- Q3. Can I change the placement of the function keys (Paper Setting, Both Sides, Adjustment,etc.) at the bottom of the MACHINE screen?
- Q4. Both this main body and the Relay Unit RU-509 (when connected) have a gamma correctionfunction. What is the difference?
- Q5. I can't register the settings adjusted using Both Sides Adjust function in a paperprofile.
- Q6. Staples are not diagonal when using corner stapling.
- Q7. I forgot the password for the password-protected hold job and HDD saved job, and now Ican't delete them.
- Q8. I can't set the weekly timer.
- Q9. No information sound is released when the machine stops due to being out of paper.
- Q10. Paper jam occurs due to overlapped sheets fed from the paper tray.
- Machine Information
- Q1. Can I replace papers in a tray not in use while printing or copying?
- Q2. Paper jam occurs when continuously printing on coated papers in the Main Body Tray.
- Q3. Paper jam occurs during printing on thin paper.
- Q4. Staple position deviates by 90 degrees.
- Q5. I forgot the HDD lock password and cannot use the HDD functions.
- Others
- Q1. Can the main body's touch panel screen be operated using a mouse?
- Q2. Can I change the printing conditions of a job after it has already started printing?
- Q3. Do I need to stop the job if I were to replace the toner bottle while a job is beingprinted?
- Q4. Can I use an external keyboard for password entry or any other entry of information?
- Q5. The heater of Perfect Binder PB-503 does not turn on when the machine's Sub PowerSwitch is turned on.
Q1. Up to how many Hold Jobs can be stored?
A1. You can stored up to 500 jobs.