Home Settings and AdjustmentsController NIC Setting Menu: Configuring the Network Information of the Controller

Controller NIC Setting Menu: Configuring the Network Information of the Controller

  • If the message [Setting will be reflected after the main power turned off/on] is displayed after any setting change in the Controller NIC Setting, turn the main power switch of the machine off and then back on.

  • Set network information for Image Controller IC-602 here. For details about network information for Image Controller IC-415 or Image Controller 308, refer to the Image Controller IC-415 or Image Controller IC-308 user's guide.

List of Controller NIC Setting

Menu Item/Description

Setting Items/Options (with default bolded)

01 TCP/IP Setting

Setup of IP address, DNS, IPsec, etc.

TCP/IP Setting

Enable, Disable

IP Address Setting Method *1 (IPv4)

Auto Setting, Manual Setting

Auto Setting (IPv4)

DHCP Setting

Enable, Disable

BOOTP Setting

Enable, Disable

ARP/PING Setting

Enable, Disable

AUTO IP Setting

Enable, Disable

Direct Setting

IP Address

0.0.0.0 (0 to 255)

Subnet Mask

0.0.0.0 (0 to 255)

Default Gateway

0.0.0.0 (0 to 255)

IPv6 Setting

IPv6 Setting

Enable, Disable*2

IPv6 Auto Setting

Enable, Disable*3

IPv6 DHCP Setting

Enable, Disable

Global Address

0000:0000:0000:0000:0000:

0000:0000:0000 (1 to 39 bytes)*4

Prefix Length

1 to 128 (0)

Link Local Address

fe80: XXXX*5

Gateway Address

0000:0000:0000:0000:0000:

0000:0000:0000 (1 to 39 bytes)*6

DNS Server Setting

DNS Server Setting (IPv4)

DNS Server Auto Setting

Enable, Disable

Primary DNS Server

0.0.0.0 (0 to 255)

Secondary DNS Server 1

0.0.0.0 (0 to 255)

Secondary DNS Server 2

0.0.0.0 (0 to 255)

DNS Server Setting (IPv6)

DNS Server Auto Setting

Enable, Disable

Primary DNS Server

0000:0000:0000:0000:0000:0000:

0000:0000 (1 to 39 bytes)

Secondary DNS Server 1

0000:0000:0000:0000:0000:0000:

0000:0000 (1 to 39 bytes)

Secondary DNS Server 2

0000:0000:0000:0000:0000:0000:

0000:0000 (1 to 39 bytes)

Dynamic DNS Setting

Enable, Disable

Host Name

KM + last 6 digits of MAC

Up to 63 one-byte characters can be used.

LLMNR Setting

Enable, Disable

DNS Domain Name Setting

DNS Domain Auto Obtain

Enable, Disable

DNS Search Domain Name Auto

Enable, Disable

DNS Default Domain Name

Up to 251 one-byte characters can be used. *8

DNS Search Domain Name 1

Up to 251 one-byte characters can be used. *8

DNS Search Domain Name 2

Up to 251 one-byte characters can be used. *8

DNS Search Domain Name 3

Up to 251 one-byte characters can be used. *8

RAW port

RAW1 Port

1 to 65535 (9100) Enable, Disable*9

RAW2 Port

1 to 65535 (9112) Enable, Disable*9

RAW3 Port

1 to 65535 (9113) Enable, Disable*9

RAW4 Port

1 to 65535 (9114) Enable, Disable*9

RAW5 Port

1 to 65535 (9115) Enable, Disable*9

RAW6 Port

1 to 65535 (9116) Enable, Disable*9

IP Filtering

Permission Setting

Enable, Disable

Range 1: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)*10

Range 2: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 3: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 4: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 5: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Denial Setting

Enable, Disable

Range 1: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)*10

Range 2: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 3: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 4: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 5: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

IPsec Setting

Permit, Prohibit

IKE Setting / IKEv1

 

Encryption Algorithm

DES-CBC, 3DES-CBC, AES-CBC

AES-CBC Key Length

128, 192, 256

Authentication Algorithm

MD5, SHA-1, SHA-2

SHA-2 Key Length

256, 384, 512

Key Valid Time

600 to 604800 (28800) (sec.)

Diffie-Hellman Group

Group 1, Group 2, Group 5, Group 14

IKEv1 Negotiation Mode

Main Mode, Aggressive Mode

IKE Setting / IKEv2

Encryption Algorithm

DES-CBC, 3DES-CBC, AES-CBC

AES-CBC Key Length

128, 192, 256, 128 and 192, 192 and 256, All

Authentication Algorithm

MD5, SHA-1, SHA-2, AES-XCBC

SHA-2 Key Length

256, 384, 512, 256 and 384, 384 and 512, All

Key Valid Time

600 to 604800 (28800)

Differ-Hellman Group

 

Priority 1

Group 1, Group 2, Group 5, Group 14, OFF

Priority 2

Group 1, Group 2, Group 5, Group 14, OFF

Priority 3

Group 1, Group 2, Group 5, Group 14, OFF

Priority 4

Group 1, Group 2, Group 5, Group 14, OFF

IPsec Setting/IPsec SA Setting

Up to 10 groups can be set.

Group 1 to Group 10
Names

Up to 10 one-byte characters can be used.

SA Setting

Use, Not Use

Encapsulation Mode

Tunnel Mode, Transport

Security Protocol

AH, ESP

Key Exchange Method

IKEv1, IKEv2, Manual Key

Authentication Method

Pre-Shared Key, Digital Signature

ESN

Enable, Disable

Relay Detection

Enable, Disable

ESP Encryption Algorithm

DES-CBC, 3DES-CBC, AES-CBC, AES-CTR, AES-GCM, AES-GCS-64,
ENC-NULL-AES-GMAC, NULL

AES-CBC Key Length

128, 192, 256, 128 and 192, 192 and 256, All

AES-CTR Key Length

128, 192, 256, 128 and 192, 192 and 256, All

AES-GCM Key Length

128, 192, 256, 128 and 192, 192 and 256, All

AES-GCM-64 Key Length

128, 192, 256, 128 and 192, 192 and 256, All

ENC-NULL-AES-GMAC Key Len

128, 192, 256, 128 and 192, 192 and 256, All

ESP Auth. Algorithm

MD5, SHA-1, SHA-2, AES-XCBC

SHA-2 Key Length

256, 384, 512, 256 and 384, 384 and 512, All

AH Auth. Algorithm

MD5, SHA-1, SHA-2, AES-GMAC, AES-XCBC

SHA-2 Key Length

256, 384, 512, 256 and 384, 384 and 512, All

AES-GMAC Key Length

128, 192, 256, 128 and 192, 192 and 256, All

Destroy Time after Setup

Destroy Time after Setup

600 to 604800 (3600) (sec.)

Perfect Forward Secrecy

Use, Not Use

Diffie-Hellman Group

 

IKEv1

Group 1, Group 2, Group 5, Group 14, OFF

IKEv2

 

Priority 1

Group 1, Group 2, Group 5, Group 14, OFF

Priority 2

Group 1, Group 2, Group 5, Group 14, OFF

Priority 3

Group 1, Group 2, Group 5, Group 14, OFF

Priority 4

Group 1, Group 2, Group 5, Group 14, OFF

Encryption Algorithm

DES-CBC, 3DES-CBC, AES-CBC, NULL

AES-CBC Key Length

128, 192, 256

Authentication Algorithm

MD5, SHA-1, SHA-2, AES-XCBC, NONE

SHA-2 Key Length

256, 384, 512

SA Index

Receive

256 to 4294967295

Send

256 to 4294967295

Common Keys for Enc.

Receive

Send

Common Keys for Auth.

Receive

Send

IPsec Setting/Peer

Up to 10 groups can be set.

Group 1 to Group 10
Names

Up to 10 one-byte characters can be used.

Set IP Address

Set IP Address

Single Address, Subnet Settings, Set Range

Single Address

IPv4 Change, IPv6 Change

Subnet Settings

IP Address: IPv4 Change, IPv6 Change

Subnet Mask: IPv4 Change, IPv6 Change

Set Range

Start: IPv4 Change, IPv6 Change

End: IPv4 Change, IPv6 Change

Pre-Shared Key

Up to 128 one-byte characters can be used.

Key-ID

Up to 128 one-byte characters can be used.

IPsec Setting/Protocol Settings

Up to 10 groups can be set.

Name

Up to 10 one-byte characters can be used.

Identification Protocol

Unspecified, TCP, UDP, ICMP, ICMPv6

Port Number

Port Number, Set Range

Port Number

From/Start: 1 to 65535

Destination/End: 1 to 65535

Set Range

From/Start: 1 to 65535

From/End: 1 to 65535

Destination/Start: 1 to 65535

Destination/End: 1 to 65535

IPsec Setting/IPsec Policy

Up to 10 groups can be set.

Name

Up to 10 one-byte characters can be used.

 Peer

1 to 10 keys

Protocol Setting

1 to 10 keys

IPsec Setting

1 to 10 keys

Direction

Both, Send, Receive

Action

Protected, Allow, Deny, Cancel

Dead Peer Detection

15, 30, 45, 60, 75, 105, 120

Cookie

Enable, Disable

ICMP Pass

Enable, Disable

ICMPv6 Pass

Enable, Disable

Default Action

Allow, Deny

IPsec Setting/Check Connection

PING Confirmation

Ping Send Address

IPv4 Change, IPv6 Change
IPv4
0.0.0.0 (0 to 255)
IPv6
0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes)

Check Connection

Start

Communication Error Log

02 NetWare Set

Configure the network settings to use this machine by connecting to the NetWare environment.

<Netware Set>

IPX Setting

Enable, Disable

Ethernet Frame Type

Auto Detect, 802.2, 802.3, Ethernet II, 802.3SNAP

NetWare Print Mode

Disable, Pserver, Nprinter, Rprinter

Nprinter/Rprinter Set

Print Server Name

KM + last 6 digits of MAC Address

Up to 63 one-byte characters can be used.

Printer Number

0 to 255 (255)

Pserver Setting

Print Server Name

KM + last 6 digits of MAC Address

Up to 63 one-byte characters can be used.

Print Server Password

Up to 63 one-byte characters can be used.

Polling Interval

1 to 65535 (1) (sec.)

Bindery/NDS Setting

NDS, Bindery/NDS

File Server Name

Up to 47 one-byte characters can be used.

NDS Context Name

Up to 191 one-byte characters can be used.

NDS Tree Name

Up to 63 one-byte characters can be used.

Status

Server Name, Queue Name

03 HTTP Server Setting

Select whether or not to use PageScope Web Connection (PSWC) or configure an environment of usage for IPP printing.

<HTTP Server Setting>

HTTP Server Setting

Enable, Disable

PSWC Setting

Enable, Disable

IPP Setting

IPP Setting

Enable, Disable

IPP Job Accept

Enable, Disable

<HTTP Server Setting/IPP Setting>

Operation Support Number

Print Job

Enable, Disable*9

Valid Job

Enable, Disable*9

Cancel Job

Enable, Disable*9

Open Job Attributes

Enable, Disable*9

Open Job

Enable, Disable*9

Open Printer Attributes

Enable, Disable*9

Printer Information

Printer Name

Up to 127 one-byte characters can be used.

Printer Location

Up to 127 one-byte characters can be used.

Printer Information

Up to 127 one-byte characters can be used.

Printer URI

Unmodifiable

IPP Auth. Setting

IPP Auth. Setting

Enable, Disable

Authentication Method

Requesting-user-name, basic, digest

User Name

user

Up to 20 one-byte characters can be used.

Password

pass

Up to 20 one-byte characters can be used.

realm

IPP

Up to 127 one-byte characters can be used.

04 WebDAV Setting

Configure an environment of usage for WebDAV transmission (such as Scan to WebDAV) or usage of WebDAV server functionality provided to this machine.

<WebDAV Server Setting>

WebDAV Server Setting Setting

Enable, Disable

SSL Setting

Non-SSL Only, SSL Only, SSL/Non-SSL

Access Right Setting

sysadm
Up to 64 one-byte characters can be used.

<WebDAV Client Setting>

WebDAV TX Setting

Enable, Disable

Chunk Transmission

Enable, Disable

Connection Time Out Time

5 to 300 (60 (seconds)

Server Authentication Character Code

UTF-8, Windows Code Pages

Proxy Settings

Proxy Server Address

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0

Host Name Change

Up to 253 one-byte characters can be used. *8

Proxy Server Port Number

1 to 65535 (8080)

User Name

Up to 63 one-byte characters can be used.

Password

Up to 63 one-byte characters can be used.

Cert. Verification Level

Expiration date

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Revocation Checking

Confirm, Do Not Confirm

05 FTP Setting

Configure an environment of usage for FTP transmission (such as Scan to FTP) or usage of FTP server functionality provided to this machine.

<FTP Setting>

FTP Server Setting

Enable, Disable

FTP Send Setting

FTP Send Setting

Enable, Disable

Proxy Server Address

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes)

Host Name Change
Up to 253 one-byte characters can be entered. *8

Proxy Server Port Number

1 to 65535 (21)

PASV Mode

Enable, Disable

Connection Time Out Time

5 to 300 (60) (sec.)

06 SNMP Setting

Configure the settings to acquire machine information or to monitor the machine.

<SNMP Setting>

SNMP Setting

SNMP Setting

Enable, Disable

SNMPv1/v2c (IP)

Enable, Disable*9

SNMPv3 (IP)

Enable, Disable*9

SNMPv1 (IPX)

Enable, Disable*9

UDP Port Number

UDP Port Number

1 to 65535 (161)

<SNMP Setting/SNMPv1/v2c Setting>

Read Community Name Set

Read Community Name

public

Up to 15 one-byte characters can be used.

Write Community Name Set

Write Permission Setting

Permit, Prohibit*9

Write Community Name

private

Up to 15 one-byte characters can be used.

<SNMP Setting/SNMPv3 Setting>

Context Name Setting

Context Name

Up to 63 one-byte characters can be used.

Discovery User Name Set

Discovery User PermitSet

Permit, Prohibit*9

Discovery User Name

public

Up to 32 one-byte characters can be used. *11

Read User Name Setting

Read User Name

Up to 32 one-byte characters can be used. *11

Security Level

No Admission, auth-password, auth-password/priv-password

<SNMP/SNMPv3/Read User Name Setting>

Password Setting

Read User auth-Password

AuthPassword

8 to 32 one-byte characters can be used.

Read User priv-Password

PrivPassword

8 to 32 one-byte characters can be used.

<SNMP/SNMPv3/Write User Name Setting>

Write User auth-Password

Write User Name

restrict

Up to 32 one-byte characters can be used.

Security Level

No Admission, auth-password, auth-password/priv-password*11

Password Setting

Write User auth-Password

8 to 32 one-byte characters can be used. MAC Address (colons ":" excluded)

Write User priv-Password

8 to 32 one-byte characters can be used. MAC Address (colons ":" excluded)

<SNMP Setting/SNMPv3 Setting>

Authentication Algorithm

DES, AES-128

Authentication Method

MD5, SHA-1

SNMP Setting

TRAP Permission Setting

Permit, Prohibit

TRAP set (auth. failure)

Enable, Disable

07 SMB Setting

Configure an environment of usage for SMB (Server Message Block), such as Scan to SMB.

<SMB Setting>

SMB Send Setting

SMB Send Setting

Enable, Disable

NTLM Setting

NTLMv1, NTLMv2, NTLMv1/NTLMv2, Kerberos, Kerb./NTLMv1/v2*7

DFS Setting

Enable, Disable

Publication Service

Enable, Disable

Default Domain Name

Up to 64 one-byte characters can be used.

Print Setting

Print Setting

Enable, Disable

NetBIOS Name

KM + last 6 digits of MAC Address

Up to 15 one-byte characters can be used.

Print Service Name

PRESS_C1070, [PRESS_C1060]

Up to 12 one-byte characters can be used.

Work Group

WORKGROUP
Up to 15 one-byte characters can be used.

<SMB/WINS Setting>

WINS Setting

WINS Setting

Permit, Prohibit

WINS Auto Setting

Permit, Prohibit

WINS Server Address

WINS Server Address 1

0.0.0.0 (0 to 255)

WINS Server Address 2

0.0.0.0 (0 to 255)

Node Type Setting

B Node, P Node, M Node, H Node

Direct Hosting Setting

Enable, Disable

08 AppleTalk Setting

In use on Mac OS, configure an environment of usage for AppleTalk.

AppleTalk Setting

AppleTalk Setting

Permit, Prohibit

Printer Name

KM + last 6 digits of MAC Address

Up to 31 one-byte characters can be used.

Zone Name

*

Up to 31 one-byte characters can be used.

Current Zone

Unmodifiable

09 Bonjour Setting

In use on Mac OS, configure an environment of usage for Bonjour.

Bonjour Setting

Bonjour Setting

Permit, Prohibit

Bonjour Name

Up to 63 one-byte characters can be used.

10 E-mail Setting

Configure the settings to send and receive E-mails (including Scan to E-mail).

SMTP Setting

SMTP Setting

Enable, Disable

SMTP Server Address

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0

Host Name Change

Up to 253 one-byte characters can be used. *8

SSL Setting

SMTP over SSL, Start TLS, Disable

Port Number

1 to 65535 (25)

Port Number (SSL)

1 to 65535 (465)

Connection Time Out Time

30, 60, 90, 120, 150, 180, 210, 240, 270, 300 (sec.)

Binary Division

Enable, Disable

Divided Mail Size

100 to 15000 (500) (step: 100) (K byte)

Server Quantity

0 to 100 (0) (M byte)

Specify "0" to make it unlimited.

Cert. Verification Level

Expiration date

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Revocation Checking

Confirm, Do Not Confirm

SMTP Setting

POP Before SMTP

Enable, Disable (sec.)

Auth

SMTP Authentication

Enable, Disable

POP Before SMTP Time

POP Before SMTP Time

0 to 60 (0)

SMTP Auth. Setting

User ID

Up to 255 one-byte characters can be used.

Password

Up to 128 one-byte characters can be used.

realm

Up to 255 one-byte characters can be used.

POP Setting

POP Server Address

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes)

Host Name Change

Up to 253 one-byte characters can be used. *8

Login Name

Up to 63 one-byte characters can be used.

Password

Up to 15 one-byte characters can be used.

APOP Authentication

Enable, Disable

SSL Setting

Enable, Disable

Port Number

1 to 65535 (110)

Port Number (SSL)

1 to 65535 (995)

Connection Time Out Time

30, 60, 90, 120, 150, 180, 210, 240, 270, 300 (sec.)

Cert. Verification Level

Expiration date

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Revocation Checking

Confirm, Do Not Confirm

11 TCP Socket Setting

Specifies whether to enable functions like a communication with the TWAIN driver (TCP Socket settings) and like tray information in the PageScope Web Connection related to Flash Player(TCP Socket(ASCII Mode)).

TCP Socket Setting

TCP Socket Setting

Enable, Disable

Port Number

1 to 65535 (59158)

SSL Setting

Enable, Disable

Port Number (SSL)

1 to 65535 (59159)

TCP Socket (ASCII Mode)

TCP Socket (ASCII Mode)

Enable, Disable

Port Number (ASCII Mode)

1024 to 65535 (59160)

12 OpenAPI Setting

Configure an environment of usage for a communication application software related with this machine.

<OpenAPI Setting>

OpenAPI Setting

Enable, Disable

SSL Setting

SSL/Non SSL, SSL Only, Non-SSL Only

Auth

Auth

Enable, Disable

Login Name

Up to 8 one-byte characters can be used.

Password

Up to 8 one-byte characters can be used.

Port Number

1 to 65535 (50001)

Port Number (SSL)

1 to 65535 (50003)

Cert. Verification Level

Client Cert.

Requesting, Not requesting

Expiration date

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Revocation Checking

Confirm, Do Not Confirm

13 Web Service Setting

Configure an environment of usage for the Web service function.

Web Service Settings

Friendly Name

KM + last 6 digits of MAC Address

Up to 62 one-byte characters can be used.

SSL Setting

Enable, Disable

Print Setting

Print Setting

Enable, Disable

Printer Name

KM + last 6 digits of MAC Address

Up to 63 one-byte characters can be used.

Printer Location

Up to 63 one-byte characters can be used.

Printer Information

Up to 63 one-byte characters can be used.

Web Service Extension Setting

Proxy 1 to 3
Use Proxy Setting

Enable, Disable

SSL Setting

Enable, Disable

Host Name

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes)

Host Name Change

Up to 253 one-byte characters can be used. *8

Port Number

1 to 65535 (80)

File Path

Set value: Up to 255 one-byte characters can be used.

Scan Settings

Scan Settings

Enable, Disable

Scanner Name

KM + last 6 digits of MAC Address

Up to 63 one-byte characters can be used.

Scanner Location

Up to 63 one-byte characters can be used.

Scanner Information

Up to 63 one-byte characters can be used.

14 JSP Setting

Configure an environment of usage for the a JAVA-based communication application softwares like Color Centro, Job Centro.

<JSP Setting>

JSP Setting

Enable, Disable

SSL Setting

Enable, Disable

Auth

Auth

Enable, Disable

Login Name

Unknown

Up to 8 one-byte characters can be used.

Password

change it

Up to 8 one-byte characters can be used.

Port Number

30081 to 30090 (30081)

Port Number (SSL)

30081 to 30090 (30082)

15 LDAP Setting

Configure the settings of LDAP server or for searching a destination from Active Directory.

<LDAP Setting>

LDAP Setting

LDAP Setting

Enable, Disable

Maximum Search Results

5 to 100 (100)

Connection Time Out Time

5 to 300 (60) (sec.)

LDAP Server Register

LDAP Server Address

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes)

Host Name Change

Up to 253 one-byte characters can be used. *8

Search Base

Up to 255 one-byte characters can be used.

SSL Setting

Enable, Disable

Port Number

1 to 65536 (389)

Port Number (SSL)

1 to 65536 (636)

Cert. Verification Level

Expiration date

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Revocation Checking

Confirm, Do Not Confirm

Authentication Method

Anonymous, Simple, Digest-MD5, GSS-SPNEGO, NTML v1, NTML v2

Server Auth. Method Select

Current Setting, Dynamic Auth.

Login Name

Up to 255 one-byte characters can be used.

Password

Up to 128 one-byte characters can be used.

Domain Name

Up to 64 one-byte characters can be used.

Referral Setting

Use, Not Use

Check Connection

Start

16 IEEE802.1X Authentication Setting

Configure IEEE802.1X authentication settings.

Authentication Status

IEEE802.1X Authentication Setting

Enable, Disable

Supplicant Setting

You can configure the settings for a supplicant (authentication client) at Administrator Setting under PageScope Web Connection.

Cert. Verification Level

Expiration date

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

17 Hot Folder Setting

Configure an environment of usage for Hot Folder.

Hot Folder Setting

Hot Folder Function

Enable, Disable

ON (MFP)

Synchronize, Not Synchronize

Print Order

File Copy Start Order, File Copy Completion Order

User Setting

Register, Edit, Delete

No.

001 to 999

User Name

Up to 20 one-byte characters can be used.

Password

Up to 20 one-byte characters can be used.

Folder Setting

Register, Edit, Delete

Password

Up to 20 one-byte characters can be used.

No.

001 to 999

Public

Enable, Disable

Folder Name

Up to 80 one-byte characters can be used.

Output Method

Print, Hold, Print & Hold

Delete Printed File

Delete, Save

Auth

Guest, Registered User

Print Setting Priority

Each Job's Print Setting, Hot Folder's Print Setting

Print Setting *12

01 PDL

02 Paper Tray Setting

03 Output Tray Setting

04 Simplex/Duplex

05 Bind Direction

06 Staple

07 Punch

08 Fold/Trimming

09 Offset

10 Output Setting

11 Order

12 Sets

13 Sort/Group

14 Output Paper Size (specifies an output paper size)

15 Orientation

16 Banner Option

17 Banner Tray

18 Convert Paper Size

19 Combine Originals/Image Repeat

20 Booklet

21 Adhesive Binding

22 Image Position

23 Pile Permission

24 Resolution

25 Feed Way

26 Colored Paper

27 Paper Type

28 Full Bleed

Delete All Printed Files

Yes, No

18 Detail Setting

Configure the settings for status notification or PING Confirmation to check whether to be connected to this machine.

<Detail Setting>

Device Setting

MAC Address

Network Speed

Auto Setting, 10Mbps Half Duplex, 10Mbps Full Duplex, 100Mbps Half Duplex, 100Mbps Full Duplex

<Detail Setting/Time Adjustment Setting>

NTP Setting

Enable, Disable

NTP Server Address

Auto NTP Server Address

Enable, Disable

NTP Server Address

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes)

Host Name Change

Up to 253 one-byte characters can be used. *8

Port Number

1 to 65535 (123)

Auto Time Adjustment

Use, Not Use

Polling Interval

1 to 240 (24) (hrs)

<Status Notification/Alert E-mail>

Group

1 to 5 (1)

Alert E-mail Setting

Enable, Disable

Trans E-mail Address

Up to 250 one-byte characters can be used.

Trans Items

Service Call, Dispose of Trim Scrap Box, Waste Toner Box Full, Toner Supply, Finisher Tray Full, Dispose of Punch Scrap Box, Replenish Paper Tray, Exchange Trim Receiver, Staple Cartridge Supply, Humidifier Tank Supply, JAM, Glue Pellet Supply, PM Call, Dispose of Staple Scrap Box, Out of Bind parts, HDD(Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full

<Status Notification/SNMP Trap>

Group

1 to 5 (1)

Trans Setting

Enable, Disable

Trans Address

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0

Host Name Change

Up to 253 one-byte characters can be used.

Trans Port No.

1 to 65535 (162)

Trans Community Name

public

Up to 15 one-byte characters can be used.

Trans Items

Service Call, JAM, Replenish Paper Tray, Toner Supply, PM Call, Staple Cartridge Supply, Finisher Tray Full, Dispose of Punch Scrap Box, Dispose of Trim Scrap Box, Glue Pellet Supply, Exchange Trim Receiver, Waste Toner Box Full, Dispose of Staple Scrap Box, Humidifier Tank Supply, Out of Bind parts, HDD(Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full

Trans Setting

Enable, Disable

Trans IPX Network Address

00: 00: 00: 00

Trans IPX Node Address

00: 00: 00: 00: 00: 00

Trans IPX Community Name

public

Up to 15 one-byte characters can be used.

Trans Items

Service Call, JAM, Replenish Paper Tray, Toner Supply, PM Call, Staple Cartridge Supply, Finisher Tray Full, Dispose of Punch Scrap Box, Dispose of Trim Scrap Box, Glue Pellet Supply, Exchange Trim Receiver, Waste Toner Box Full, Dispose of Staple Scrap Box, Humidifier Tank Supply, Out of Bind parts, HDD(Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full

PING Confirmation

PING Send Address

IPv4 Change

0.0.0.0 (0 to 255)

IPv6 Change

0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes)

Host Name Change

Up to 253 one-byte characters can be used. *8

Check Connection

Check Connection

Start

LPD Setting

Enable, Disable

SLP Setting

Enable, Disable

LLTD Setting

Enable, Disable

SSDP Setting

Enable, Disable

Cert. Verifi. Settings

ON, OFF

Use SSL Version

SSL3.0, TLS1.0, TLS1.1, TLS1.2

AD Auth. LDAP over SSL

Enable, Disable

AD Auth. LDAP over SSL Port Number

1 to 65536 (636)

Network Setting Clear

Network Setting Clear, Start

*1:

Select [Auto Setting] to make "DHCP Setting," "BOOTP Setting," "ARP/PING Setting," and "AUTO IP Setting" available. However, changing the selection from [Auto Setting] to [Direct Setting] invalidates the settings made for "DHCP Setting" and "BOOTP Setting." Also, changing from [Direct Setting] to [Auto Setting] validates the settings made for "DHCP Setting," "BOOTP Setting," "ARP/PING Setting," and "AUTO IP Setting."

*2:

Selecting [Disable] for "IPv6 Setting" disables this function, even if [Enable] is selected for "IPv6 Auto Setting." In PageScope Web Connection, the drop-down list of ''IPv6 Auto Setting'' appears dimmed to show inactivity.

*3:

Selecting [Disable] for "IPv6 Auto Setting" enables the setting change of "Global Address," "Prefix Length," and "Gateway Address."

*4:

Unavailable for the ranges from fe80: : to febf: ffff: ffff: ffff: ffff: ffff: ffff: ffff, and

from ff00: : to ffff: ffff: ffff: ffff: ffff: ffff: ffff: ffff.

*5:

XXXX will be calculated from the MAC address.

*6:

Unavailable only for the range from fe80: 0: 0: 0: : to fe80: 0: 0: 0: ffff: ffff: ffff: ffff.

*7:

When using Scan to SMB on Mac OS X 10.7 or later, be sure to select the setting including "NTLMv2".

*8:

Up to 253 one-byte characters including periods can be entered for the host name.

To enter 64 characters or more, you need to use periods (.) to separate the characters.

*9:

If you specify the settings using PageScope Web Connection, the setting values change to Enable or Permit when 0 is entered. When the check boxes are deselected, the values switch to Disable or Prohibit.

*10:

Only one IP address, not a range, can be permitted/denied in three ways.

For example, to permit/deny 192.168.11.22 only, enter:

192.168.11.22 - 0.0.0.0

0.0.0.0 - 192.168.11.22

192.168.11.22 - 192.168.11.22

*11:

"Discovery User Name" cannot be specified with the same entry as that for "Read User Name" or "Write User Name."

*12:

For details about the Print Setting, refer to Basic Settings: Registering Direct Print Initial Settings.