Configure

[Acquire Device Information]

Detect an optional device installed on this machine.

• When  appears at the right of [Acquire Device Information], the device information has been acquired.

[Multi Folder]

Set the punch, PI cover sheet, and fold functions.

[Stacker]

Stack a large number of printed documents on a stacker.

[Stapler]

Set this to use the staple function.

[Punch Kit]

Set this to use the punch function.

[Saddle Unit]

Set this to use functions such as [Multi Tri-Fold], [Multi Half-Fold], and [Fold and Staple].

[Cover Sheet Feeder]

Coated paper or other paper can be inserted to keep the heat from the main body from interfering.

[Saddle-Stitcher]

Set this to use functions such as [Fold and Staple], [Fold and Staple + Trim], and [Multi Half-Fold].

[Perfect Binder]

Set this to use the perfect binder function.

[Ring Binder]

Set this to bind the printed paper using ring-shaped binder.

[Multi Hole Punch Unit]

Set this to use the multi-hole punch function.

[Paper Source Unit]

Select Tray 3 to 5, or Bypass tray as the paper tray.

[Fuser Envelope]

Envelope print is available.

[Acquire information at the start of driver]

Select this to acquire information when the driver starts.

[Secure Print Only]

Select this to allow only secure printing.

[Display password input screen during Secure Print]

Select this to display a password input screen that prompts users to enter a password when using Secure Print.

[Allow user name to change]

Select this to allow the user name to be changed.

[Allow authentication password to change]

Select this to allow the user authentication password to be changed.

[MacOS Keychain]

User Name and Password can be registered with key chain access when setting User Authentication and Account Track.

• Only Mac OS are supported.

[Unit]

Select either [Metric] or [Imperial] for the units of measurement.

[Language]

Set a language.

• Only Windows OS are supported.

[Configure General Panel]

You can set the item to be displayed on the [General] tab.

[SNMP Version]

Specify the SNMP (Simple Network Management Protocol) version.

[Read Community Name ]

Specify the community name. Reenter the community name for confirmation in Reenter field.

[Context Name]

Enter the context name.

[Read User Name]

Enter the user name.

[Security Level]

Specify the security level.

[Auth-Password]: The password is necessary to be authenticated.

[Auth-Password/Priv-Password]: The encrypted password is necessary to be authenticated.

[Read User Auth- Password]

Enter the auth-password. Reenter the auth-password for confirmation in Reenter field.

[Read User Priv- Password]

Enter the encryption password. Reenter the encrypted auth-password for confirmation in the Reenter field.