When Reset is pressed on the control panel, the machine clears all the copy conditions specified so far and restores arbitrary settings. This function is called Reset.
Select from [Full Auto] and [Initialize] to choose which conditions are enabled as arbitrary settings.
These settings cannot be changed except Output Setting.
[Bind Direction]: [Right & Left]
[Direction]: [Normal]
[Type]: [Text/Photo (Print)]
[Special]: [Normal]
[Original Size]: [Standard]
[Copy Density]: 0
[Background Removal]: 0
[Red]/[Green]/[Blue]/[Hue]/[Saturation]/[Brightness]: 0
[Sharpness]: 0
[Contrast]: 0
[Distinction]: [Text] 0, [Color] 0
[Screen Pattern]: [Auto]
[Color Balance]: 0 for all items
[Zoom]: 1.000 (x 1.0)
[Simplex/Duplex]: [1->1] (ADF: ON)
[Application]: None
[Color] Setting: [Full Color]
[Auto Paper]: ON
[Output Setting]: Sort*
*: When a finisher is connected, settings selected in the utility settings are set ([UTILITY] - [User Setting] - [System Setting] - [Reset Setting] - [Job Reset Setting] - [Finisher Mode when Full Auto]).
These are the copy conditions set from the [Copy Initial Setting] screen on the [UTILITY] screen. For details, refer to Copy Initial Setting: Setting the Default Copy Conditions.
If Mode Memory Auto Call is ON and data exists in Mode Memory No. 30, the conditions return to the settings in Mode Memory No. 30.
If Mode Memory Auto Call is OFF or data does not exist in Mode Memory No. 30, the conditions comply with [Copy Initial Setting].
These are the copy conditions registered by pressing Mode Memory on the control panel.
When Reset is applied, the following settings become effective.
Effective Setting | Reset Button Function* | Mode Memory Auto Call Function* | Data in Mode Memory No. 30 |
Full Auto | Full Auto | - | - |
Initialize | Initialize | ON | NO |
OFF | - | ||
Mode Memory No. 30 | Initialize | ON | YES |
*: Within [UTILITY] - [User Setting] - [System Setting] - [Reset Setting] - [Job Reset Setting]
Copy conditions common to the arbitrary settings
The following settings function in common, irrespective of the selection made from Full Auto, Initialize, and conditions registered to Mode Memory No. 30.
[Change User]: [ON], [OFF]
[ADF Original Direction]: [Reset], [Not Reset]
[Initial by KeyCounter Insert]: [ON], [OFF]
[Status Hold When Auto Reset]: [Not Keep], [Keep]
[Next Job Staple Setting]: [Release], [Do Not Release]
[Original Set/Bind Direction]: [Release], [Do Not Release]
For details about Initial copy conditions, refer to Copy Initial Setting: Setting the Default Copy Conditions.
For copy conditions specified as Full Auto or common conditions for the arbitrary settings, refer to Job Reset Setting: Setting the Function Reset Conditions.
For programming of Mode Memory, refer to Mode Memory: Registering / Recalling/Repeatedly Using Copy Job Setting.