Home ConsumablesReplenishing Staple Supply in Saddle Stitcher SD-506

Replenishing Staple Supply in Saddle Stitcher SD-506

When the staple cartridge of Saddle Stitcher SD-506 becomes empty, the following message will appear in the message area of the screen.

[Please add staples to the saddle stitcher left side stapler]

[Please add staples to the saddle stitcher right side stapler]

The Staple Cartridge indicator lights in red in the [Consumable and Scrap Indicators] area of the [MACHINE] screen.

Be sure to supply the designated stapler with staples.

  • Hold both left and right sides of the staple cartridge, then draw it forward.

  • The machine is mounted with two staple cartridges. Be sure to remove the empty one.

  • Check that the top side of the staple cartridge is up. With the top side down, the staple cartridge cannot be inserted.

  1. Display the help message on the [MACHINE] screen, and then press [Consumable/Scrap].

  2. Press the [Add Stapler] tab in the help message area.

  3. Follow the on-screen instructions. To switch between the pages, press [][].