This automatically adjusts the color reproducibility of the whole paper to be output.
• Image quality adjustment flow and the position of this adjustment
In the pre-output image quality adjustment flow, this adjustment is positioned shown below.
Perform the previous adjustment before proceeding with this adjustment.
To not continuously perform the series of adjustment of the image quality adjustment flow, perform the gamma automatic adjustment, and then resume from the next adjustment.
• For Image Controller IC-602:
Image quality adjustment flow | Position of this adjustment | ||
Previous adjustment | This adjustment | Next adjustment | |
Adjustment flow when changing the screen | (STEP 1: Screen selection) | STEP 2: This adjustment | (STEP 3: Density balance adjustment) |
Regular adjustment flow (Standard) | - (None) | ||
Regular adjustment flow (High accuracy) | - (None) | STEP 2: This adjustment | (STEP 3: Maximum density adjustment) |
• For Image Controller IC-308 or Image Controller IC-310:
Image quality adjustment flow | Position of this adjustment | ||
Previous adjustment | This adjustment | Next adjustment | |
Adjustment flow when changing the screen | (STEP 1: Screen selection) | STEP 2: This adjustment | (STEP 3: Density balance adjustment) |
Fine adjustment flow (High accuracy) | - (None) | STEP 2: This adjustment | (STEP 3: Maximum density adjustment) |
On the touch panel of the main body, press [Adjustment] on the [MACHINE] screen.
The [Adjustment Menu] is displayed.
Press [Execute Adjust Operation] on the [Adjustment Menu] screen.
Press [Gamma Automatic Adj.] and press [OK].
Press [Exit [ADJUSTMENT]].
Wait for the display "Now adjusting" to disappear.