Follow the procedure below to recall jobs that are already stored.
To display the [Mode Memory Mode] screen, display the [SCAN] screen, and then press Mode Memory on the control panel. When the [MACHINE] or other screen is displayed, the [Mode Memory Mode] screen is not displayed.
Position the original.
Press [SCAN] tab to display the [SCAN] screen.
Press Mode Memory on the control panel.
The [Mode Memory Mode] screen is displayed.
Press the job number key that you want to recall.
Press [Program Check].
The [Mode Check] screen is displayed. Review the job settings.
The current settings of Print Side, Quality Adjustment and Scan Size are displayed in the left side area of the [Mode Check] screen.
The current settings of Color/Resolution and Zoom Setting are displayed on the right side of the [Mode Check] screen.
Press [Close] on the [Mode Check] screen.
The registered scan settings are recalled and the [SCAN] screen is displayed.
Change the settings as required.
Enter the desired print quantity, then press Start on the control panel.