Web Service Settings

Click [Web Service Setting] - [Web Service Setting] in the [Network] tab to display this screen.

The setting contents are the same as those accessed by selecting [Network Setting] - [NIC Setting] - [Web Service Setting] in Administrator Setting.

This screen allows you to make settings concerning the common setting of Web service.

1. Enter a desired name into the [Friendly Name*] text box. Up to 62 one-byte characters can be used.

2. Select either [Enable] or [Disable] from the [SSL Setting] drop-down list.

   • This item is not displayed when the device certificate is not installed.

3. Click [OK]. Clicking [Cancel] cancels the setting.

4. Click [OK] on the setting complete screen.

5. If you have changed any setting, turn the machine power off then on.