Cover

[Banner Tray]

[Off], [Automatically Select], Tray 1 to 9

Select a tray from which a header page is inserted.

[PI Front Cover Tray]

[Off], PI Tray 1 to 2

Use this setting to insert a front cover sheet that is different from the print paper, such as thick paper.

Continuous insertion is available for up to 500 sheets when PI Tray is selected.

[Front Cover Tray]

[Off], Tray 1 to 9

Select a tray for a front cover.

[Print]

Add a check mark when printing on the front cover sheet.

[Paper Profile] (Front cover sheet)

[Unspecified], Registered paper profile

Select predefined paper profile.

You can add a new paper profile to the list from the touch panel on the machine.

[Back Cover Tray]

[Off], Tray 1 to 9

Select a tray for a back cover.

[Print]

Add a check mark when printing on the back cover sheet.

[Paper Profile] (Back cover sheet)

[Unspecified], Registered paper profile

Select predefined paper profile.

You can add a new paper profile to the list from the touch panel on the machine.

[PI Back Cover Tray]

[Off], PI Tray 1 to 2

Use this setting to insert a back cover sheet that is different from the print paper, such as thick paper.

Continuous insertion is available for up to 500 sheets when PI Tray is selected.

[Mode]

[Off], [Cover Blank], [Cover Print 1in1 (Cover Portrait)], [Cover Print 1 in 1 (Cover Landscape)], [Cover Print 2in1], [Cover Print 3in1]

Select a cover tray for a perfect binder.

[Cover Trim]

Off, On

Set this when trimming a cover for a perfect binder.

[Spine Width]

1.0 mm to 30.0 mm

Set the width of a spine.

The initial setting is 10.0 mm at default.

[Cover 2-Sided]

Off, On

Set this when setting a 2-sided cover for a perfect binder.

[Cover tray]

[Off], Tray 1 to 9, PI Tray 1 to 2, PB Cover Tray

Select a cover tray for a perfect binder.

[Cover Size]

-

Set the cover size.

Click [Custom Size] to set a custom size for the cover.

[Paper Profile]

-

Set a paper profile.