Enabling Banner Mode
Press [Common Setting] on the [User Setting] screen or [Administrator Setting] screen of [UTILITY], and then select [ON] on [Banner].
If Banner mode is enabled, [Banner Mode] is displayed on the [MACHINE] screen.
For details on about setting Banner mode, refer to Common Setting: Setting the Various Operations of the Machine and Common Setting: Setting the Various Operations of the Machine.
When Banner mode is enabled, [Gap], [Scan Meas.] for Both Side Adjust setting are not displayed for Main Body Trays in addition to Bypass Tray. Also, even if Image Controller IC-602 is equipped, [Thickness] is not displayed in Banner mode.