Home Paper and OriginalsLoading Banner Paper into Feeding Extension Tray

Loading Banner Paper into Feeding Extension Tray

Sizes and weights of the Banner paper that can be used are as follows.

  • Banner paper size: Widthwise 100 mm to 330.2 mm, Lengthwise 487.8 mm to 1200 mm / Widthwise 3.94" to 13", Lengthwise 19.2" to 47.24" *
    *Banner paper of 279 mm / 10.98" or narrower in width may not be correctly printed depending on the paper type or environment.

  • Banner paper weight: 128 g/m2 to 256 g/m2 / 34 lb Bond to 68 lb Bond

  • Number of sheets that can be loaded in the feeding extension tray is 10 (1 sheet for coated paper).

  1. Load banner paper into Banner Tray Unit MK-740 (feeding extension tray) with the print side up.

  2. Align both side guide plates of Bypass Tray to the banner paper.

  • In order to prevent the sheets from sticking together, separate each sheet off a paper bundle, and then load only required number of sheets.
    If a long period of time has elapsed with the paper being kept loaded, separate the sheets again one by one, and then reload them before printing.