Settings Required to Use Scan to FTP
In order to send the scan data to the FTP server, the following items need to be set.
Register Name
Enter a name of a destination.
If you register the name, it is displayed on the destination list.
Reference Name
Enter text to search for a destination.
If you register the text, you can use it to search for the destination.
Host Address
You can specify an FTP server name or an IP Address of the FTP server.
File Path
You specify a directory in the FTP server.
Login Name
You specify a Login Name for the FTP server.
Password
You specify a corresponding Password to each Login Name for the FTP server.
Port No.
You can specify a Port No. when necessary.
You can register a Register Name, Reference Name, Host Address, File Path, Login Name, Password, and Port No. For details, refer to Registering an FTP Server as a Destination.
Be sure to check that the scan data are not damaged.
If the data are damaged, check the network.
Depending on a network condition, the scan data may be damaged.
For details, contact your administrator.
Controller NIC Setting Menu: Configuring the Network Information of the Controller