When a Message Appears to Replace Consumables or Carry Out Cleaning
When staples in the Finisher have run out
When staples in the Finisher have run out, a message appears to prompt you to make replenish them.
Take action while referring to the label inside the machine.
Reference
For details on how to replace a staple cartridge when [Replace the Staple Cartridge.] is displayed, refer to [Replacing a Staple Cartridge] .- For details on how to replace a saddle staple cartridge when [Replace the Saddle Staple Cartridge 1 or 2.] is displayed, refer to [Replacing a Saddle Staple Cartridge] .
When the punch scrap box is full
When the punch scrap box is full, a message appears to prompt you to dispose of the punch scraps (at replacement by user).
Take action while referring to the label inside the machine.
Reference- For details on the handling procedure when using the Finisher FS-536/FS-536 SD, refer to [Finisher FS-536 / Finisher FS-536 SD] .
- For details on the handling procedure when using the Finisher FS-537/FS-537 SD, refer to [Finisher FS-537 / Finisher FS-537 SD] .
When toner is running out in the Toner Cartridge
When it is almost time to replace a Toner Cartridge, an advanced warning message appears. Prepare a replacement Toner Cartridge based on the maintenance contract.
When it is time to replace a Toner Cartridge
When it is time to replace a Toner Cartridge, a replacement prompt message appears. Replace it based on the maintenance contract. Tap [Start Guidance] to display the replacement procedure on the screen and check it.
Reference- For details on the replacement procedure, refer to [Replacing a Toner Cartridge] .
Tips- Do not replace a Toner Cartridge of a color that is not displayed.
- When it is time to replace a Toner Cartridge of a color other than black, printing can be forcibly continued using black. Tap [Continue], and then select a desired print job.
When it is time to replace an Imaging Unit
When it is time to replace an Imaging Unit, a replacement prompt message appears. Replace it based on the maintenance contract. Tap [Start Guidance] to display the replacement procedure on the screen and check it.
NOTICE- An Imaging Unit must not be replaced before the relevant message appears.
Reference- For details on the replacement procedure, refer to [Replacing an Imaging Unit] .
Tips- By the factory default status, this message is displayed only in some area.
- The settings by the service representative are required to display a message about Imaging Unit. For details, contact your service representative.
- When it is time to replace an Imaging Unit of a color other than black, printing can be forcibly continued using black. Tap [Continue], and then select a desired print job.
When the Waste Toner Box is full
When the Waste Toner Box is full, a message appears to prompt you to replace it (at replacement by user). Tap [Start Guidance], then follow the displayed guidance to take an action.
Reference- For details on the replacement procedure, refer to [Replacing a Waste Toner Box] .