HomeWeb Management ToolSetting the Power key/Power save function

Setting the Power key/Power save function

Configure the settings on how to use the Power key and the machine action in Power Save mode.

Select [Maintenance] - [Timer Setting] - [Power Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.

Setting

Description

[Low Power Mode Setting]

Change the time required to automatically shift to the Low Power mode after you did not operate this machine (default: [15] minutes, available range: [2] to [60] minutes).

In the Low Power mode, the display of the Touch Panel is turned off to reduce power consumption.

[Sleep Mode Setting]

Change the time required to automatically shift to the Sleep mode after you did not operate this machine (default: [15] minutes, available range: [2] to [60] minutes).

Sleep mode provides a greater power saving effect than the Low Power mode. However, the time required to return to the normal mode is longer than the time required to recover from the Low Power mode.

[Power Consumption in Sleep Mode]

Select whether to reduce the power consumption in the Sleep mode (default: [High]).

  • [High]: Further reduces the power consumption in the Sleep mode. However, this machine cannot be returned from the Sleep mode when the door of the main unit is opened or closed or when the original is loaded.

  • [Enabled]: Reduces the power consumption in the Sleep mode.

  • [Disabled]: Select this option when a smooth network communication is not established while [High] or [Enabled] is enabled.

[Power Save Settings]

Select the power save mode (Low Power or Sleep) to be switched when the Power key on the Control Panel is pressed (default: [Low Power]).

[Power Key Setting]

Select whether to use the Power key on the Control Panel as a sub power OFF key or as a power save key (default: [Power Save]).

  • [Sub Power OFF]: Press the Power key briefly to turn the sub power off. If the Power key is held down, the power save mode is switched to the ErP Auto Power Off mode (similar to main power off mode), which provides a greater power saving effect than when the sub power is turned off.

  • [Power Save]: Press the Power key briefly to shift to the Power Save mode. Hold down the Power key to turn the sub power off.

[Enter Power Save Mode]

When this machine receives a print job from a fax machine or computer in the Power Save mode, select the timing to switch to the Power Save mode after the print job has ended (default: [Immediately]).

  • [Normal]: Switches to the Power Save mode based on the time specified in [Low Power Mode Setting] or [Sleep Mode Setting].

  • [Immediately]: Switches to the Power Save mode immediately after a print job has ended.

[Power Saving Fax/Scan]

Select whether to give priority to the power saving when returning from the Sleep or sub power off mode to a mode other than the copy mode (default: [Standard]).

When returning to a mode that does not involve printing, such as scan/fax mode, power consumption can be reduced by not adjusting the temperature of the Fusing Unit on this machine.

This option is available when an item other than [Copy] is selected in [Screen to display after Reset] of [System Auto Reset] (Here).

  • [Power Save]: The temperature of Fusing Unit is not adjusted when the machine returns to the normal mode.

  • [Standard]: The temperature of Fusing Unit is adjusted when the machine returns to the normal mode.

[Awake from Power Save Mode by Touching Control Panel]

When recovering the machine from Power Save mode when a user moves closer to the Touch Panel, set this option to ON (default: ON).

  • The following settings are not displayed when the optional Image Controller is installed on this machine.
    [Power Consumption in Sleep Mode], [Power Key Setting]

  • Switching to Power Save Mode Using the Power Key (Here)