HomeFaxSending a Confidential Fax (F-Code TX)

Sending a Confidential Fax ([F-Code TX])

About confidential communication

The confidential communication function is designed for communications with specific people using a Confidential User Box that requires a registered number and a password.

This ensures fax communications are sent with enhanced security.

  • The destination fax needs to have the F-code function.

  • You need to check the recipient's Confidential User Box number and the password for confidential fax reception.

  • This function cannot be used together with the following functions.
    Password TX, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board)

  • [Function ON/OFF Setting] - [F-Code TX] (Here)

Operation flow

  1. Load the original.

  2. Display the Fax screen of classic style.

    • For details on how to display the screen, refer to Here.

  3. Specify the destination.

  4. Tap [Application] - [Fax Setting] - [F-Code TX], and tap [ON].

  5. Enter the [SUB Address] and [Sender ID], and tap [OK].

    • [SUB Address]: Enter the Confidential User Box number.

    • [Sender ID]: Enter the communication password for confidential RX.

  6. Use the Start key to start transmission.