[SNMP v1/v2c Setting] | Configure SNMP v1/v2c settings.  [Read Community Name]: Enter a read-only community name (using 1 to 15 characters, excluding spaces, \, ', ", and #) (default: [public]).
[Write Community Name]: When allowing reading and writing, set this option to ON (default: ON). Also enter a community name used for reading and writing (using 1 to 15 characters, excluding spaces, \, ', ", and #) (default: [private]).
|
[SNMP v3 Setting] | Configure SNMP v3 settings. [Context Name]: Enter the context name (using up to 63 characters, excluding spaces, \, ', ", and #). [Discovery User Name]: When allowing the detection user, set this option to ON (default: ON). Also, enter a user name for detection (using 1 to 32 characters, excluding spaces, \, ', ", and #) (default: [public]). [Read User Name]: Enter a read-only user name (using up to 32 characters, excluding spaces, \, ', ", and #) (default: [initial]).
[Security Level]: Select a security level of the user in the read-write enable state (default: [auth-password/priv-password]).
[auth-password]: If [auth-password] or [auth-password/priv-password] is selected from [Security Level], enter an authentication password for the read-only user (using 8 to 32 characters, excluding spaces, \, ', ", and #).
[priv-password]: If [auth-password/priv-password] is selected from [Security Level], enter a password used for privacy (encryption) of the read-only user (using 8 to 32 characters, excluding spaces, \, ', ", and #). [Write User Name]: Enter the user name of the user in the read-write enable state (using up to 32 characters) (default: [restrict]).
[Security Level]: Select a security level of the user in the read-write enable state (default: [auth-password/priv-password]).
[auth-password]: If [auth-password] or [auth-password/priv-password] is selected from [Security Level], enter an authentication password for the read-write enabled user (using 8 to 32 characters, excluding spaces, \, ', ", and #) (default: MAC address of this machine (Alphabetic characters are all in capitals, excluding colons (:)).
[priv-password]: If [auth-password/priv-password] is selected from [Security Level], enter a password used for privacy (encryption) of the read-write enabled user (using 8 to 32 characters, excluding spaces, \, ', ", and #) (default: MAC address of this machine (Alphabetic characters are all in capitals, excluding colons (:)). [Encryption Algorithm]: Select an encryption algorithm (default: [DES]). [Authentication Method]: Select an authentication algorithm (default: [MD5]).
|