Registering an IP Fax (SIP) Destination

An IP fax (SIP) destination can be registered or edited using Web Connection. Although character input is a difficult process using the Touch Panel, it can be carried out easily if you use the computer.

Select [Store Address] - [Address Book] - [New Registration] in user mode or administrator mode of Web Connection. In [Select Destination], select [IP-FAX(T38)], and configure the following settings.

Setting

Description

[No.]

Destination registration number. Select [Use opening number] to automatically assign the smallest available number. When you want to specify a number, select [Input directly] and then enter a number.

[Name]

Enter the destination name (using up to 24 characters).

[Index]

Select an index to search for a destination using the registered name.

For a frequently used destination, select the [Main] check box. The destinations are displayed on the destination selection screen, enabling the user to easily select a destination.

[Destination Type]

Select the format to specify the destination (default: [Direct method]).

  • [Direct method]: Enter the destination's host name or IP address. Select this option when directly calling the destination.

  • [SIP server method]: Specify SIP-URI of the destination. Select this option when calling the destination via the SIP server.

[IP Address (Host Name)]

Enter the destination's host name or IP address.

  • Example to enter the host name: "host.example.com" (Include the domain name to enter.)

  • Example to enter the IP address (IPv4): "192.168.1.1"

  • Example to enter the IP address (IPv6): "fe80::220:6bff:fe10:2f16"

[Port No.]

If necessary, change the port number (default: [5060]).

[SIP-URI/SIP User Name]

Enter the destination's SIP-URI.

Entry example: "sip:abc@example.com"

When only the SIP user name is entered, the SIP domain name of this machine is used as the destination's domain name.

[Connection Mode]

Select the transport protocol (default: [UDP]).

[Select Line]

If multiple lines are used, select the line used to send a fax.

In general use, use [Line 1]. If [Not Selected] is selected, an idle line is used for transmission.

Tips

  • To edit or delete a registered destination, specify the target destination in the destination list, and select [Edit] or [Delete].