* Enter the name of the utility key. You can search descriptions of utility keys.

Card Shot

To display: [Copy][Application][Other][Card Shot]

When you want to copy cards, you can arrange the front and back sides of the card on the same side of a single page and print them onto one sheet.

Settings

Description

[ON]/[OFF]

Select [ON] to specify Card Shot.

[Original Size]

Specify the size of the card to copy by tapping [+]/[-] for the inch area, by tapping [+]/[-] or Keypad for the centimeter area. To display the Keypad, tap the input area for the numeral. From the [Registered Paper Size], you can recall a size previously stored and specify the size.

After you have entered the size, select a key in [Registered Paper Size], and tap [OK]. Then the size you have entered is registered in the memory. You can recall the registered size in the future.

[Registered Paper Size]

Displays the sizes registered in memory.

When you call a registered size from the memory, tap the key of the desired registration name, then tap [Recall].

[Layout]

Select the layout for arranging the front side and back side of the card on the paper from [Top/Bottom], [Left/Right (Top Half)], and [Left/Right].

[Zoom]

Select a zoom ratio for copying.

  • [Full Size]: Copy by enlarging according to the paper size.

  • [x1.0]: Copy with the same size as the card.

[Change registered size name]

Change the name of the key you selected in [Registered Paper Size].

Reference
Related setting
  • A card size can be registered, and the default [Layout] and [Zoom] values can be changed. For details, refer to [Card Shot Settings] .