Detail Settings

[Device Setting]

Check the MAC address of this machine, enable or disable LLTD (Link Layer Topology Discovery), and specify the network speed.

For details, refer to [Device Setting] .

[Time Adjustment Setting]

Configure settings to automatically adjust the date and time of this machine using the NTP (Network Time Protocol) server.

For details, refer to [Time Adjustment Setting] .

[Status Notification Setting]

Configure the setting for notifying to the registered E-mail address when a warning such as for toner replacement or a paper jam occurs on this machine.

For details, refer to [Status Notification Setting] .

[Total Counter Notification Settings]

Configure the setting for sending counter information managed by this machine to a registered E-mail address.

For details, refer to [Total Counter Notification Settings] .

[PING Confirmation]

Send a ping to the device communicating with this machine, to check for proper connection.

For details, refer to [PING Confirmation] .

[SLP Setting]

Select whether to enable the SLP (Service Location Protocol).

For details, refer to [SLP Setting] .

[LPD Setting]

Select whether to enable the LPD (Line Printer Daemon).

For details, refer to [LPD Setting] .

[Prefix/Suffix Setting]

Register a prefix and suffix of an E-mail address. Also, configure the setting for recalling the registered prefix and suffix when entering an E-mail address.

For details, refer to [Prefix/Suffix Setting] .

[Error Code Display Setting]

Select whether to display network error code on the Touch Panel.

For details, refer to [Error Code Display Setting] .