* Enter the name of the utility key. You can search descriptions of utility keys.

FTP Server Settings

To display: [Utility][Administrator Settings][Network Settings][FTP Settings][FTP Server Settings]

Configure settings to enable use of the FTP server function of this machine.

Using this machine as an FTP server allows you to associate this machine with an application that operates as an FTP client.

Settings

Description

[ON]/[OFF]

Select whether to use the FTP server function of this machine.

[OFF] is specified by default.

[Deny Reception Command]

Select a command to deny a receiving job from an FTP client when using the FTP server of this machine.

Set this option to return an error when a PORT/EPRT command or PASV/EPSV command is sent from an FTP client to this machine.

[Allow] is specified by default.

[PORT Command Enhanced Security]

Select whether to enable the security of this machine against FTP bounce attacks. This option is not available if [Deny Reception Command] is set to [PORT/EPRT].

When a PORT/EPRT command is sent from an FTP client, the data connection is established only if both of the following conditions are satisfied:

  • A port number less than 1024 is not specified.

  • The IP address specified by the command is same as that specified when a control connection is established.

[Enable] is specified by default.