* Enter the name of the utility key. You can search descriptions of utility keys.

IPv4 Filtering (Permit Access)

To display: [Utility][Administrator Settings][Network Settings][TCP/IP Settings][IPv4 Filtering (Permit Access)]

Specify an IPv4 address of a computer to which you want to allow access to this machine.

Settings

Description

[Enable]/[Disable]

Select whether to specify an IPv4 address that allows access to this machine.

[Disable] is specified by default.

[Set 1] to [Set 5]

Enter the range of IPv4 addresses that allow access using the following format.

  • Entry example: "192.168.1.1 - 192.168.1.10"

  • If a single IPv4 address is allowed to access, you can only enter the address in one side of the range.