* Enter the name of the utility key. You can search descriptions of utility keys.

FTP

To display: [Scan/Fax][Direct Input][FTP]

Enter a destination FTP server host name or IP address when scanned original data is sent to a FTP server.

When specifying multiple destinations, tap [Next Dest.] to add destinations.

Settings

Description

[Host Name]

Enter the host name or IP address of the destination FTP server (using up to 253 bytes).

  • Example of host name entry: "host.example.com"

  • Example of IP address (IPv4) entry: "192.168.1.1"

  • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"

[File Path]

Enter the name of a destination folder in the FTP server specified in [Host Name] with up to 127 bytes.

  • Entry example: "scan"

When specifying a folder in the FTP folder, insert a symbol, "/", between the folder names.

  • Entry example: "scan/document"

When not specifying a file path, enter only "/".

  • Entry example: "/"

[User Name]

If authentication is required in the destination FTP server, enter the available user name to log in (using up to 64 characters).

  • Entry example: "public_user"

[Anonymous]

When authentication is not required for the destination FTP server, select this item.

[Password]

Enter the password of the user specified in [User Name].

[Port Number]

If necessary, change the port number.

In normal circumstances, you can use the original port number.

[21] is specified by default.

[Proxy]

When a proxy server is used in your environment, select this item.

[PASV]

When a PASV server is used in your environment, select this item.