HomeDescrizione delle funzioni / tasti utilità2nd Z-Fold Position Adjustment

2nd Z-Fold Position Adjustment

To display:
  • [Utility]
    • [Expert Adjustment]
      • [Finisher Adjustment]
        • [2nd Z-Fold Position Adjustment]

Use this option to adjust the 2nd Z-fold position.

Copy after configuration, then repeat adjustments as required.

Setting

Description

[Paper Type]

Select the paper type to adjust the fold position for.

[Adjust Value]

Enter the adjustment value between -12.8 mm and 12.7 mm (default: [0.0 mm]).

Increase the value when moving the folding position rightward, and reduce it when moving the folding position leftward.

  • This setting is displayed when the option is installed in this machine. For details on the required option, refer to Qui.

  • Make adjustment while checking paper folded at a displaced position.

  • The value you set by selecting [All] in [Paper Type] is added to the setting for each paper type.

  • The distance between the left end of paper and the second Z-fold position must be 1/16 inch (2 mm) or more.