HomeTroubleshootingError Code List

Error Code List

LAN (IEEE802.1X)

Code

Description

1

Connection has already been established.

2

Setting error

3

Unable to find the destination AP (SSID).

5

Negotiation of the EAP method failed.

6

The EAP authentication failed (user ID, password, certificate, etc.)

10

Verification error of the server certificate (EAP-TLS/EAP-TTLS/PEAP).

14

Negotiation of the phase 2 method failed (PEAP).

15

Response from the server has timed out.

17

Failed to start the supplicant task.

19

The server certificate has expired (EAP-TLS/EAP-TTLS/PEAP).

20

CA verification error of the server certificate (EAP-TLS/EAP-TTLS/PEAP).

21

Server ID verification error of the server certificate (EAP-TLS/EAP-TTLS/PEAP).

24

Settings are combined normally.

25

Connection and authentication are complete.

31

Incorrect format of the server certificate (EAP-TLS/EAP-TTLS/PEAP).

33

The hard disk path is not specified for the certificate verification (PKI) function (EAP-TLS/EAP-TTLS/PEAP).

34

The certificate verification (PKI) function is in the excessive multiplex processing status (EAP-TLS/EAP-TTLS/PEAP).

35

Parameter error of the certificate (EAP-TLS/EAP-TTLS/PEAP).

36

Internal error of the certificate verification (PKI) function (EAP-TLS/EAP-TTLS/PEAP).

LDAP

Code

Description

1

An invalid operation occurred.

2

A protocol error occurred.

3

The time limit is exceeded.

4

The number of search results has exceeded the maximum number of items allowed.

5

The comparison result is FALSE.

6

The comparison result is TRUE.

7

The LDAP server does not support SASL.

8

Strong authentication is required.

10

Unable to trace the link although Referral is specified.

11

Administration limit on the server has exceeded.

12

Critical extension is unavailable.

13

Confidentiality is required.

14

Intermediary bind result for multi-stage binds

15

Requested attribute does not exist.

16

The type is not defined.

17

An inappropriate matching occurred.

18

A constraint violation occurred.

19

The attribute exists or the value has been assigned.

20

The syntax is invalid.

32

Cannot find the search route.

33

The alias is invalid.

34

The syntax of DN is invalid.

35

This object is a terminal (leaf).

36

Cannot de-reference the alias.

48

Authentication is inappropriate.

49

Failed to log in to the LDAP server.

50

The user has insufficient access rights.

51

The server is busy.

52

The server is unavailable.

53

The server does not handle directory requests.

54

The chain of referrals has looped back to a referring server.

64

There was a naming violation.

65

There was an object class violation.

66

Operation is not allowed on a non-leaf object.

67

Operation is not allowed on RDN.

68

The object already exists.

69

Cannot modify object class.

70

Results returned are too large.

71

Multiple directory service agents (DSA) are affected.

80

An unexpected error occurred.

81

Unable to connect to the LDAP server.

82

An internal error occurred.

83

An encode error occurred.

84

A decode error occurred.

85

The connection has timed out.

86

The supported SASL does not match the LDAP server side.

87

The searching filter is invalid.

88

Cancelled by the user.

89

An internal parameter error occurred.

90

Failed to allocate memory.

91

Unable to connect to the LDAP server.

92

The supported LDAP version does not match the LDAP server side.

93

The LDAP function did not find the specified control.

94

The result is not included in the message.

95

Additional results are to be returned.

96

Client loop was detected.

97

The referral limit was exceeded.

128

Failed to resolve the LDAP server name using the DNS server.

129

The certificate of the LDAP server has expired.

130

Mutual authentication using GSS-SPNEGO (Kerberos v5) failed.

131

The search result remains.

132

The process is cancelled by a device reset.

2238

The CN field of the LDAP server certificate does not match the server address.

2239

The LDAP server certificate does not have the expected usage for a server.

2240

The LDAP server certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

2241

The LDAP server certificate has expired.

2242

The CA server rejected the connection.

2243

The connection to the server that checks for expiration of the certificate has timed out.

2244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

2261

The format of the LDAP server certificate is invalid.

2263

The hard disk has not been set.

2264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

2266

Internal error of the certificate verification/management module.

2267

The device certificate does not exist.

2268

No certificate is sent from the communications peer.

10000

Failed in authentication using a PKI card (PKI token).

12236

The ticket certificate has expired.

12239

The ticket certificate does not have the expected usage for a server.

12240

The ticket certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

12241

The ticket certificate has expired.

12242

The CA server rejected the connection.

12243

The connection to the server that checks for expiration of the certificate has timed out.

12244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

12261

The format of the ticket certificate is invalid.

12263

The hard disk has not been set.

12264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

12266

Internal error of the certificate verification/management module.

Reception (E-mail/Internet FAX/IP Address FAX)

Code

Description

1

Failed to log in to the E-mail server.

2

An internal error occurred.

3

Failed to connect to the server.

4

The connection has timed out.

5

Decoding failed due to invalid MIME format or S/MIME format.

6

Failed to allocate memory.

7

Job ID is invalid.

9

Failed to delete an E-mail message.

10

The mail box is full.

11

Failed to search the certificate.

12

Failed to retrieve the device certificate or private key.

13

An I/O error occurred.

A hard disk operation error has occurred, or memory capacity of the computer may be insufficient.

14

The S/MIME function is disabled.

15

The hard disk is invalid.

16

The format of the certificate from the E-mail sender is invalid.

2236

The certificate has expired, or the validity period has not yet started.

2238

The CN field of the certificate does not match the server address.

2239

The certificate does not have the expected usage.

2240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

2241

The certificate has expired.

2242

The CA server rejected the connection.

2243

The connection to the server that checks for expiration of the certificate has timed out.

2244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

2261

The format of the certificate is invalid.

2263

Failed to initialize the certificate verification.

2264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

2266

Internal error of the certificate verification.

2267

The device certificate does not exist.

2268

No certificate is sent from the server.

FTP Transmission

Code

Description

11

The network connection is busy.

22

Parameter error (e.g. the file name is NULL).

27

Parameter is invalid.

92

The specified protocol is unavailable.

100

The device is not connected to the network.

102

The process is cancelled by a device reset.

105

Failed to allocate memory.

106

The FTP connection is already open.

107

Failed to connect to the server.

110

The connection has timed out.

111

The connection has been interrupted.

450

The file has not been deleted.

451

The file transfer failed (e.g. due to insufficient server capacity).

452

The file transfer failed (e.g. due to insufficient server capacity).

530

Incorrect login name or password.

550

The specified folder does not exist.

552

The file operation failed (e.g. due to insufficient server capacity).

1001

Failed to create a folder.

SMB Transmission

Code

Description

11

The network connection is busy.

92

The protocol is not initialized.

100

The device is not connected to the network.

The connection has been interrupted.

102

The network is reset during forwarding.

105

An I/O buffer capacity shortage occurred.

107

Failed to connect to the server.

4096

The host name is not specified.

The specified host name does not exist on the network.

4097

The user name is not specified.

Unable to log in with the specified user name and password.

The user does not have write permission to the folder.

Failed to log in due to an SMB protocol error.

4098

The folder name is not specified.

The specified folder does not exist.

4099

The user name is not specified.

Unable to log in with the specified user name and password.

The user does not have write permission to the folder.

Failed to log in due to an SMB protocol error.

4100

The specified file name is invalid.

4101

The specified file already exists and is write-protected.

The folder and the disk are write-protected.

4102

The specified media to be written is not formatted.

The file system of the specified media to be written is faulty.

4103

The server capacity is full.

4104

The server capacity has become full while writing data.

4105

Other errors to which an error code is not assigned.

4106

The specified file does not exist.

4107

The specified directory is not found.

4108

Failed to create the specified directory.

10000

Failed in authentication using a PKI card (PKI token).

12236

The certificate has expired, or the validity period has not yet started.

12239

The purpose of the certificate is not right.

12240

CA that cannot be trusted or is not registered.

12241

The certificate has expired.

12242

The CA server rejected the connection.

12243

The connection to the server that checks for expiration of the certificate has timed out.

12244

The size of the expiration list is too large.

12263

Failed in initialization of the certificate verification.

12264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

12266

Internal error of the certificate verification.

12267

The device certificate does not exist.

12268

No certificate is sent from the server.

Transmission(E-mail/Internet FAX/IP Address FAX)

Code

Description

11

The network connection is busy.

22

Invalid argument.

27

The file size is too large.

28

Insufficient memory of the device.

32

The pipe is broken.

92

The specified protocol is unavailable.

100

The device is not connected to the network.

101

Unable to reach the destination network.

102

The connection aborted by the network.

105

A buffer shortage occurred.

107

No connection exists with the client.

108

The connection has been interrupted.

110

The operation has timed out.

111

The connection is rejected.

112

The host is shut down.

421

SMTP server error. Since the service is unavailable, the transfer channel is closed.

432

SMTP server error.

The password must be changed.

450

SMTP server error.

Unable to access to the mail box.

451

SMTP server error.

The requested action has been cancelled because an error occurred while processing a job.

452

SMTP server error.

Shortage of the system storage capacity.

453

SMTP server error.

No E-mail massage.

454

SMTP server error.

Temporary authentication failure.

458

SMTP server error.

Unable to queue a message to the node.

459

SMTP server error.

The node is not permitted.

499

SMTP server error.

An unsupported SMTP error code of 400s is received from the SMTP server.

500

SMTP server error.

Syntax error (command unrecognized).

501

SMTP server error.

Syntax error in parameters or arguments.

502

SMTP server error.

The command is not implemented.

503

SMTP server error.

Bad sequence of commands.

504

SMTP server error.

The command parameter is not implemented.

521

SMTP server error.

The server does not receive mail.

530

SMTP server error.

The access is rejected.

534

SMTP server error.

The authentication mechanism is too weak.

535

SMTP server error.

Authentication error.

538

SMTP server error.

The requested authentication mechanism requires encryption.

550

SMTP server error.

The requested action is not executed.

551

SMTP server error.

The user is not connected locally.

552

SMTP server error.

The requested E-mail action is cancelled.

553

SMTP server error.

The requested action is not accepted.

554

An SMTP server error, or an internal error when sending data.

The transaction failed.

555

SMTP server error.

MAIL/RCPT parameter error.

599

SMTP server error.

An unsupported SMTP error code of 500s is received from the SMTP server.

2236

The certificate has expired, or the validity period has not yet started.

2238

The CN field of the certificate does not match the server address.

2239

The certificate does not have the expected usage.

2240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

2241

The certificate has expired.

2242

The CA server rejected the connection.

2243

The connection to the server that checks for expiration of the certificate has timed out.

2244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

2261

The format of the certificate is invalid.

2263

Failed to initialize the certificate verification.

2264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

2266

Internal error of the certificate verification.

2267

The device certificate does not exist.

2268

No certificate is sent from the server.

3000

An unexpected error occurred.

3001

An unexpected error occurred within the library being used.

3002

An invalid channel is specified.

3003

SMTP server address is invalid.

3004

Parameter error (MIMEBodyHeader).

3005

Parameter error (DisplayName).

3006

Parameter error (character set).

3007

Parameter error (From address).

3008

Parameter error (To address).

3009

Parameter error (CC address).

3010

Parameter error (BCC address).

3011

Parameter error (EmailSet is NULL).

3012

Parameter error (destination certificate is NULL).

3013

Parameter error (E-mail body).

3014

The hard disk is invalid.

3015

The S/MIME function is disabled.

3016

Self-certificate error. The device certificate cannot be used in the S/MIME function. One possibility, among others, is that the type of encryption key is not RSA.

3018

An invalid encryption algorithm is specified.

3019

An invalid signature algorithm is specified.

3020

The E-mail address included in the destination certificate does not match the destination address (To/Cc/Bcc).

3021

The E-mail address included in the certificate does not match the sender (From) address.

3022

Format error of the certificate.

3023

Parameter error (Disposition-Notification-To).

3024

Message syntax error of the receiver side.

3025

The SMTP server does not support the STARTTLS command.

3026

PKI card access error.

3027

Parameter error (SMTP authentication method)

3028

Parameter error (PIN code)

3029

Failed to retrieve a ticket.

10000

Failed in authentication using a PKI card (PKI token).

12236

The validity period of the server certificate is invalid.

12239

The certificate does not have the usage expected as a server.

12240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

12241

The certificate has expired.

12242

The CA server rejected the connection.

12243

The connection to the server that checks for expiration of the certificate has timed out.

12244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

12261

The format of the certificate is invalid.

12263

Although the environment is configured to use the hard disk, it is unable to perform verification because the hard disk path has not been specified.

12264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

12266

Internal error of the certificate verification/management module.

WebDAV Transmission

Code

Description

11

The network connection is busy.

22

The format of the URL of the target resource is invalid. Parameter error.

27

Attempted to send data that exceeds the maximum transferrable size for transfer coding.

92

WebDAV send is disabled.

100

The device is not connected to the network.

102

The process is cancelled by a device reset.

105

A buffer shortage occurred.

106

The connection has already been established.

107

The connection to the WebDAV server failed (including connection time out).

125

The connection has been interrupted with the condition that is insufficient to the specified size.

401

Authentication error.

407

Proxy authentication error.

1001

The server does not support WebDAV.

Unable to upload data to the server.

1002

The intermediate resource is not a collection (directory) (e.g. the specified folder does not exist).

1003

The target resource is a collection (directory).

1012

Although "https" is specified for the resource URL, the connection is interrupted because the WebDAV server certificate has expired.

1013

The CONNECT method is issued to the proxy server to establish an SSL connection via a proxy, but it is rejected.

1017

A communication error occurred while sending a request.

1018

A communication error occurred while receiving a response.

1027

The transfer size exceeds the maximum allowance.

1030

Although use of a proxy has been specified, the proxy setting information is unavailable.

1031

The connection to the proxy server failed (including connection time out).

1040

Failed to retrieve a ticket.

1098

Failed in chunk TX to SharePoint Server.

1099

Another internal error occurred (e.g. memory shortage).

2236

The certificate has expired, or the validity period has not yet started.

2238

The CN field of the certificate does not match the server address.

2239

The certificate does not have the expected usage.

2240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

2241

The certificate has expired.

2242

The CA server rejected the connection.

2243

The connection to the server that checks for expiration of the certificate has timed out.

2244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

2261

The format of the certificate is invalid.

2263

Failed to initialize the certificate verification.

2264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

2265

Parameter error.

2266

Internal error of the certificate verification.

2267

The device certificate does not exist.

2268

No certificate is sent from the server.

10000

Failed in authentication using a PKI card (PKI token).

12236

The validity period of the server certificate is invalid.

12239

The certificate does not have the usage expected as a server.

12240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

12241

The certificate has expired.

12242

The CA server rejected the connection.

12243

The connection to the server that checks for expiration of the certificate has timed out.

12244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

12261

The format of the certificate is invalid.

12263

Although the environment is configured to use the hard disk, it is unable to perform verification because the hard disk path has not been specified.

12264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

12266

Internal error of the certificate verification/management module.

SMB Browsing

Code

Description

32

The connection has been interrupted.

92

The specified protocol is unavailable.

100

The device is not connected to the network.

The internal channel detected an error immediately before establishing communication.

107

Failed to connect to the server.

4096

The group name/host name is not specified.

The specified group name/host name does not exist on the network.

4097

The user name is not specified.

Unable to log in with the specified user name and password.

Failed to log in due to an SMB protocol error.

4098

Administrative shares do not exist.

The shared resource name is not specified.

The shared resource does not exist.

4099

The user name is not specified.

Unable to log in with the specified user name and password.

Failed to log in due to an SMB protocol error.

4102

The specified media to be written is not formatted.

The file system of the specified media to be written is faulty.

4105

Other errors to which an error code is not assigned.

4352

The browser machine (master browser/backup browser) is not found.

4353

Unable to log in to the browser machine (master browser/backup browser).

4354

The sub folder does not exist.

4355

The request is not accepted due to an invalid call sequence etc.

4368

The number of groups is too large.

4369

The number of host PCs is too large.

4370

The number of shared resources is too large.

10000

Failed in authentication using a PKI card (PKI token).

12236

The certificate has expired, or the validity period has not yet started.

12239

The purpose of the certificate is not right.

12240

CA that cannot be trusted or is not registered.

12241

The certificate has expired.

12242

The CA server rejected the connection.

12243

The connection to the server that checks for expiration of the certificate has timed out.

12244

The size of the expiration list is too large.

12263

Failed in initialization of certificate verification (The path of the hard disk for saving certificates is not specified).

12264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

12266

Internal error of the certificate verification.

12267

The device certificate does not exist.

12268

No certificate is sent from the server.

User Authentication

Code

Description

1

Invalid parameter (e.g. the number of characters exceeds the limit, blank).

The authentication function setting is disabled.

2

Failed to resolve the name using the DNS server.

3

Unable to find the authentication server.

4

Failed to authenticate.

5

Failed to allocate memory.

An unexpected error occurred.

6

An authentication request is received while an internal task of the user authentication client is being performed.

7

The network was reset during user authentication.

8

Failed to allocate memory.

9

Time out occurred.

10000

Failed in authentication using a PKI card (PKI token).

12236

The SSL certificate has expired.

12239

The certificate does not have the expected usage.

12240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

12241

The certificate has expired.

12242

The CA server rejected the connection.

12243

The connection to the server that checks for expiration of the certificate has timed out.

12244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

12261

The format of the certificate is invalid.

12263

The hard disk has not been set.

12264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

12266

Internal error of the certificate verification.

WebDAV Client/Remote Panel

Code

Description

2

The ID of a client that is not active is specified.

3

(Response reception) Receive time out occurred.

(Request transmission) An invalid request method is specified.

4

(Response reception) A receive error occurred. Or an invalid request URL is specified.

(Request transmission) An invalid request URL is specified.

5

(Response reception) The size of the content length or the receive size exceeds the maximum transferable size. Or the size of the message body is too large.

(Request transmission) The size of the message body is too large.

6

(Response reception) The process is cancelled by a device reset. Or the size of the message body exceeds the maximum transferable size.

(Request transmission) The size of the message body exceeds the maximum transferable size.

7

(Response reception) An internal error occurred. Or the process is cancelled by an internal reset.

(Request transmission) The process is cancelled by an internal reset.

8

Failed to connect to the WebDAV server.

9

An error occurred while sending data to the WebDAV server.

10

A timeout occurred while sending data to the WebDAV server.

11

Failed to connect to the proxy server.

12

The proxy server rejected the connection request.

13

While the proxy server specification is valid, the host of the proxy server is not specified.

14

Failed to authenticate the proxy server.

15

Other error was returned from the proxy server.

16

An internal error occurred.

17

The process is cancelled because MIO_REQBODY_ERROR is specified by the device application.

18

An invalid PIN code is specified.

19

Failed to retrieve a ticket.

20

The internally specified parameter is invalid.

2236

The certificate has expired, or the validity period has not yet started.

2238

The CN field of the certificate does not match the server address.

2239

The certificate does not have the expected usage.

2240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

2241

The certificate has expired.

2242

The CA server rejected the connection.

2243

The connection to the server that checks for expiration of the certificate has timed out.

2244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

2261

The format of the certificate is invalid.

2263

Failed to initialize the certificate verification.

2264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

2266

Internal error of the certificate verification.

2267

The device certificate does not exist.

2268

No certificate is sent from the server.

10000

Failed in authentication using a PKI card (PKI token).

12236

The validity period of the server certificate is invalid.

12239

The certificate does not have the usage expected as a server.

12240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

12241

The certificate has expired.

12242

The CA server rejected the connection.

12243

The connection to the server that checks for expiration of the certificate has timed out.

12244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

12261

The format of the certificate is invalid.

12263

Although the environment is configured to use the hard disk, it is unable to perform verification because the hard disk path has not been specified.

12264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

12266

Internal error of the certificate verification/management module.

WebService Scan

Code

Description

1

The specified client is not registered.

2

Parameter is invalid.

3

The Web service or WS scan function is disabled.

4

The device is not connected to the network.

5

Waiting for connection from CP.

6

The SSL certificate of the destination computer is not valid when the validity period of an SSL certificate is checked.

11

The network connection is busy.

22

Invalid argument.

92

The Web service or WS scan function is disabled.

102

The network connection is cancelled by a device reset.

103

The connection has been interrupted.

105

Failed to allocate memory.

107

No connection exists with the client.

110

The operation has timed out.

125

The RetrieveImage waiting period has timed out.

Distributed Scan

Code

Description

1

The action is not supported.

2

The specified parameter is invalid.

3

The operation failed.

4

A temporary error occurred on the scan server.

5

An internal error occurred on the scan server.

6

The scan server returned an error due to operation by an unauthorized user.

7

The scan server returned an error due to invalid request.

8

Addresses for secondary distribution are not supported.

9

The destination address is not included in the scan process.

10

The scan server returned an error due to access by an unauthorized user.

11

The scan server returned an error due to a request for invalid action.

12

The scan server returned an error due to transmission of unregistered scan process to the scan server.

13

The scan server returned an error due to a request for invalid action.

14

The scan server returned an error due to use of a format that is not supported.

2236

The SSL certificate has expired.

2238

The CN field of the certificate does not match the server address.

2239

The certificate does not have the expected usage.

2240

The certificate could not be trusted. To trust the certificate, the certificate must be registered to the system.

2241

The certificate has expired.

2242

Cannot connect to the CA server upon certificate verification.

2243

Time out occurred at the time of the certificate verification.

2244

The size of the expiration list is too large.

2261

The format of the certificate is invalid.

2263

No verification can be performed as he hard disk path has not been specified yet.

2264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

2265

Parameter of the certificate verification is invalid.

2266

Internal error of the certificate verification/management module.

2267

The device certificate does not exist.

2268

No certificate is sent from the communications peer.

Bluetooth

Code

Description

2

Failed to communicate.

3

An error occurred on the hardware related to Bluetooth.

4

Failed to allocate memory.

5

Interrupted from the device side.

Single Sign-On

Code

Description

4099

The specified Key tab does not exist.

10000

Failed in authentication using a PKI card (PKI token).

12236

The validity period of the server certificate is invalid.

12239

The certificate does not have the usage expected as a server.

12240

The certificate is not trusted. To trust the certificate, the certificate must be registered to the system.

12241

The certificate has expired.

12242

The CA server rejected the connection.

12243

The connection to the server that checks for expiration of the certificate has timed out.

12244

Unable to check for expiration because the CRL size exceeds the maximum capacity that can be retained (1MB).

12261

The format of the certificate is invalid.

12263

Although the environment is configured to use the hard disk, it is unable to perform verification because the hard disk path has not been specified.

12264

Unable to perform verification because there are too many certificates to be verified (the maximum number of certificates that can be verified at a time is 20).

12266

Internal error of the certificate verification/management module.

Wireless LAN (WPS)

Code

Description

1

Time out occurred.

3

Other errors occurred.