The following example shows how to replace a Yellow Toner Cartridge.
Shake a new Toner Cartridge well, approximately 5 to 10 times, before installing it.
If a Toner Cartridge other than for black is empty, printing can be continued forcibly using black. Tap [Continue], and then select a desired print job.
Do not forcedly open or disassemble a Toner Cartridge (toner container).
Do not forcedly remove or dispose of toner that remains in a Toner Cartridge (toner container).
After replacing a Toner Cartridge, be sure to clean the Electrostatic Charger for each color. For details on how to clean the Electrostatic Charger, refer to Here.
Install a Toner Cartridge for each label color. If you try to forcibly install a Toner Cartridge in the incorrect position, it may result in a failure.
Handling toner and Toner Cartridge
Do not throw a toner or Toner Cartridge into a fire. Doing so may cause hot toner to spray in all directions, which may cause burn injuries.
Be careful not to get the inside of the machine, your clothes, or hands dirty with toner.
If any toner does get on your hand, wash it off using water or neutral detergent.
If any toner gets into your eyes, immediately wash it out with water and consult your doctor.