Home>Introduction>Loading Paper in Tray 1 to Tray 4

Loading Paper in Tray 1 to Tray 4

The procedure for loading paper is common between Tray 1 to Tray 4. The following explains how to load paper into Tray 1.

  • Tray3 and Tray4 are optional.
  1. Pull out Tray 1.
    NOTICE
    • Be careful not to touch the Film.
  2. Slide the Lateral Guide to fit the size of the loaded paper.
  3. Load paper into the tray with the print side facing up.
    • When printing on letterhead (paper where company names, preset text, and other text or images are already printed), load it with the print side facing down.
    NOTICE
    • Do not load an excessive number of sheets such that the top of the stack is higher than the mark.
    • If paper is curled, flatten it before loading it.
  4. Close Tray 1.
  5. When loading paper other than plain paper, change the paper type setting.
    • For details, refer to Here.