HomeIntroductionTurning the Power On or Off

Turning the Power On or Off

Power supply

This machine provides two power switches: The Main Power Switch of the machine and the Power key on the Control Panel.

No.NameDescription
1
Main Power Switch
Press this switch when turning on or off the main power of this machine or restarting this machine.
2
Power key
Press this key to switch this machine to Power Save mode. This function reduces power consumption and has a greater power saving effect.
For details, refer to Here.
NOTICE
  • While printing, do not turn the Main Power Switch off or press the Power key. Otherwise, it may lead to a paper jam.
  • If the Main Power Switch is turned off or the Power key is pressed while this machine is running, the system deletes the currently loaded data or communicating data as well as queued jobs.

Turn on the Main Power Switch

  1. Open the Lower Front Door or Front Door, and set the Main Power Switch to .
  2. Close the Lower Front Door or Front Door.

    The Start key lights up orange, and a screen appears to show that this machine is in the process of start-up.

    When the Start key changes to blue, this machine is ready to use.

Turn off the Main Power Switch

When restarting this machine or if a problem has occurred, turn off the Main Power Switch.

  1. Open the Lower Front Door or Front Door.
  2. Set the Main Power Switch to to close the Lower Front Door or Front Door.
NOTICE
  • When restarting this machine, turn the Main Power Switch off and on again after 10 or more seconds have passed. Not doing so may result in an operation failure.

Operating the Power key (when using this machine in the factory default status)

Press the Power key to switch this machine to the Power Save mode.

When the Power key is pressed, the status of this machine changes as shown below. The way status changes varies depending on how the Power key is pressed.

Power keyStatus of this machineStatus of LEDDescription
Short press
Sub Power OFF
Light up:
Orange
This function reduces power consumption and has a greater power saving effect.
While the sub power is turned off, this machine can receive data or faxes, however, it cannot scan or print an original.
To turn it on, press the Power key again. If data or faxes are received while the sub power is turned off, they are printed when the sub power is turned on.
Hold down
ErP Auto Power OFF
Flash:
Orange
This function provides a greater power saving effect than the sub power off mode, which is close to the state where the main power is turned off.
In ErP Auto Power Off mode, this machine cannot receive data or faxes, and also it cannot scan or print an original.
To turn it on, press the Power key again.
NOTICE
  • Note that faxes cannot be received if the ErP Auto Power Off mode is selected in fax mode.
Reference
  • The Power key can be used as a power save key to switch to Power Save mode (Low Power or Sleep mode). For details, refer to Here.