HomeWeb Management ToolTime Adjustment Setting
To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [Detail Settings]
          • [Time Adjustment Setting]

Configure settings to automatically adjust the date and time of this machine using the NTP (Network Time Protocol) server.

SettingsDescription
[ON]/[OFF]
Select whether to automatically adjust the date and time of this machine via the NTP server.
[OFF] is specified by default.
[Auto IPv6 Retrieval]
In the IPv6 environment, select whether to automatically specify the NTP server address by DHCPv6.
[On] is specified by default.
[NTP Server Setting]
Register a discovery proxy server to perform Web service printing or scanning.
Select a number to be registered, and configure the following items.
[Host Address]
Enter the NTP server address.
Use one of the following entry formats.
  • Example of host name entry: "host.example.com"
  • Example of IP address (IPv4) entry: "192.168.1.1"
  • Example of IP address (IPv6) entry: "fe80::220:6b.:fe10:2f16"
[Port Number]
If necessary, change the NTP server port number.
Normally, you can use the original port number.
[123] is specified by default.
[Set Date]
Connect to the NTP server, and adjust the date and time of this machine.
[Auto Time Adjustment]
Select whether to automatically adjust the date and time by connecting to the NTP server at periodical intervals.
[Off] is specified by default.
[Polling Interval]
If you select [On] for [Auto Time Adjustment], specify an interval to automatically adjust the date and time.
[24 hours] is specified by default.