HomeWeb Management ToolProxy Setting for Remote Access
To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [WebDAV Settings]
          • [Proxy Setting for Remote Access]

To use the remote diagnosis system via a proxy server, register the proxy server currently used.

SettingsDescription
[ON]/[OFF]
Select whether to use a proxy server when using the remote diagnosis system.
[OFF] is specified by default.
[WebDAV Client Settings and Synchronization]
Select this option to use the proxy server registered in [WebDAV Client Settings] as a proxy server for remote diagnosis.
[WebDAV Client Settings and Synchronization] is specified by default.
[Individual Settings]
Select this option to register a proxy server for remote diagnosis separately from the proxy server registered in [WebDAV Client Settings].
[Proxy Server Address]
Enter the proxy server address.
Use one of the following entry formats.
  • Example of host name entry: "host.example.com"
  • Example of IP address (IPv4) entry: "192.168.1.1"
  • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[Proxy Server Port Number]
If necessary, change the proxy server port number. Normally, you can use the original port number.
[8080] is specified by default.
[User Name]
Enter the user name to log in to the proxy server (using up to 63 characters).
[Password]
Enter the password of the user name you entered into [User Name] (using up to 63 characters).