HomeWeb Management ToolFTP TX Settings
To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [FTP Settings]
          • [FTP TX Settings]

Configure settings to enable use of the FTP transmission function on this machine.

SettingsDescription
[ON]/[OFF]
Select whether to use the FTP transmission function of this machine.
Selecting this option sends the scanned original data to the FTP server.
[ON] is specified by default.
[Proxy Server Address]
To access to the FTP server via a proxy server, enter the proxy server address.
Use one of the following entry formats.
  • Example of host name entry: "host.example.com"
  • Example of IP address (IPv4) entry: "192.168.1.1"
  • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[Proxy Server Port Number]
If necessary, change the proxy server port number.
Normally, you can use the original port number.
[21] is specified by default.
[Port No.]
If necessary, change the FTP server port number.
Normally, you can use the original port number.
[21] is specified by default.
[Connection Timeout]
If necessary, change the time-out time to limit a communication with the FTP server.
[60 sec.] is specified by default.