HomeWeb Management ToolNetWare Print Settings
To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [NetWare Settings]
          • [NetWare Print Settings]

Configure the NetWare printing environment.

SettingsDescription
[ON]/[OFF]
Select whether to enable NetWare printing.
[OFF] is specified by default.
[NetWare Print Mode]
Select an operation mode of the print server according to your environment.
[PServer] is specified by default.
[PServer]
Press [PServer] to configure settings for using this machine as PServer.
  • [Print Server Name]: Enter the print server name (using up to 63 characters).
  • [Print Server Password]: If necessary, enter a print server password (using up to 63 characters).
  • [Polling Interval]: Specify a job inquiry interval. [1] sec. is specified by default.
  • [NDS/Bindery Setting]: Select [NDS] or [NDS & Bindery]. [NDS] is specified by default.
  • [File Server Name]: Enter the priority file server name to be used in the Bindery emulation mode (using up to 47 characters).
  • [NDS Context Name]: Enter the context name of the NDS to be connected via the print server (using up to 191 characters).
  • [NDS Tree Name]: Enter the tree name of the NDS to be connected via the print server (using up to 63 characters).
[Nprinter/Rprinter]
Press [Nprinter/Rprinter] to configure settings for using this machine as Nprinter or Rprinter.
  • [Print Server Name]: Enter the print server name (using up to 63 characters).
  • [Printer Number]: Enter the printer number.
[Status]
Allows you to check the server name, queue name, or queue status.