HomeWeb Management ToolIP Filtering (Permit Access)
To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [TCP/IP Settings]
          • [IP Filtering (Permit Access)]

Specify an IP address of a computer to which you want to allow access to this machine.

SettingsDescription
[Enable]/[Disable]
Select whether to specify an IP address that allows access to this machine.
[Disable] is specified by default.
[Set 1] to [Set 5]
Enter the range of IP addresses that allow access using the following format.
  • Entry example: "192.168.1.1 - 192.168.1.10"
  • If a single IP address is allowed to access, you can only enter the address in one side of the range.