HomeWeb Management ToolConfiguring the Daylight Saving Time Settings

Configuring the Daylight Saving Time Settings

Enable the daylight saving time function on this machine. You can also set the daylight saving time to be automatically enabled on this machine at the specified date.

In the administrator mode, select [Maintenance] - [Daylight Saving Time], then configure the following settings.

Settings	Description
[Daylight Saving Time]	Select [ON] to use the daylight saving time. Also enter the time to be adjusted for the daylight saving time (in minutes). [OFF] is specified by default.
[Specify Method]	Select the method to specify the date and time to start the daylight saving time and the date and time to end it. [Weekly]: Specify the start date and end date by week and day of the week. [Day]: Specify the start date and the end date by date.
[Start Date/Time]/[End Date/Time]	Respectively select the date and time to start the daylight saving time and the date and time to end it.

Settings

Description

[Daylight Saving Time]

Select [ON] to use the daylight saving time.

Also enter the time to be adjusted for the daylight saving time (in minutes).

[OFF] is specified by default.

[Specify Method]

Select the method to specify the date and time to start the daylight saving time and the date and time to end it.

[Weekly]: Specify the start date and end date by week and day of the week.

[Day]: Specify the start date and the end date by date.

[Start Date/Time]/[End Date/Time]

Respectively select the date and time to start the daylight saving time and the date and time to end it.