User's Guide
Using the Machine WebDAV Server for Association
Overview
To use application software with which the WebDAV server of this machine is used to communicate, configure the WebDAV server function.
If a certificate for this machine is registered, you can encrypt communication between the machine and application software using SSL.
To use the WebDAV server of this machine for the association, follow the below procedure to configure the settings.
- Configure settings for connecting to the network such as setting of the IP address of this machine
- For details on configuring the setting, refer to Here.
- Configure the WebDAV server settings
- For details on configuring the setting, refer to Here.
- Set the following options according to your environment
Purpose Reference Encrypting communication between this machine and application software with SSL.
Configuring the WebDAV server settings
Enable the WebDAV server. Also set an access right to the WebDAV server.
In the administrator mode, select [Network] - [WebDAV Settings] - [WebDAV Server Settings], then configure the following settings.
| Settings | Description |
|---|---|
[WebDAV Settings] | Select [ON] to use the WebDAV server. [OFF] is selected by default. |
[Access Rights Settings] | Specify the password to restrict accesses to the WebDAV server of this machine (using up to 64 characters). To enter (change) the password, select the [Password is changed.] check box, then enter a new password. Clicking [Initial Password] resets the set password (Default: sysadm). [OFF] (not selected) is specified by default. |
Using SSL communication
Encrypt communication between this machine and the WebDAV client application with SSL.
- Register a certificate for this machine and enable SSL communication.
- For details, refer to Here.
- In the administrator mode, select [Network] - [WebDAV Settings] - [WebDAV Server Settings], and set [SSL Setting] to [SSL Only] or [SSL/Non-SSL] (Default: [Non-SSL Only]).
