HomeWeb Management ToolRegistering a Fax Address Program

Registering a Fax Address Program

A program can be registered or edited using Web Connection. Although character input is a difficult process using the Touch Panel, it can be carried out easily if you use the computer.

A combination of address information and the fax/scan transmission option settings can be registered in a program.

The following describes the fax address program.

In the administrator mode, select [Store Address] - [Program] - [Registration] - [Fax], then click [OK] to configure the following settings.

SettingsDescription
[Name]
Enter the program name (using up to 24 characters).
Assign a name that helps you easily identify the program.
[Destination Information]
Click [Search from List], and select a destination fax address from the list. Click [Check Destination] to check registered address books.
If you wish to manually enter a destination fax address, select [Direct Input] and enter the address.
  • [Destination]: Enters the destination fax number.
  • [Line Setting]: If two lines are used, select the line used to send a fax. If [No Selection] is selected, either line, whichever is not busy, is used for transmission.
  • [Communication Setting]: As necessary, specify how to send a fax to a destination you wish to register.
Only one destination can be specified.
[Basic Setting]/[Application Setting]
Configure the fax transmission option settings.
For details, refer to Here.
[Limiting Access to Destinations]
Limit access to this destination, if necessary.
For details, refer to Here.