HomeWeb Management ToolControlling the Access to This Machine by IP Address

Controlling the Access to This Machine by IP Address

The computers' access to this machine can be controlled via IP address. This is called "IP address filtering".

You can specify both IP addresses that are allowed to access this machine and those refused to access the machine.

Tips
  • IP address filtering is not supported in the IPv6 environment.

In the administrator mode, select [Network] - [TCP/IP Setting] - [IP Filtering], then configure the following settings.

SettingsDescription
[Permit Access]
Select [Enable] to specify IP addresses allowed to access. Also enter the range of IP addresses allowed to access.
If a single IP address is allowed to access, you can only enter the address in one side of the range.
  • Example of entry: "192.168.1.1"
[Disable] is specified by default.
[Deny Access]
Select [Enable] to specify IP addresses refused to access. Also enter the range of IP addresses.
If a single IP address is refused to access, you can only enter the address in one side of the range.
  • Example of entry: "192.168.1.1"
[Disable] is specified by default.