Home>Web Management Tool>Using the Compulsory Memory RX Function

Web Management Tool

Using the Compulsory Memory RX Function

Memory RX is a function to save a received fax in the Memory RX User Box of this machine without printing it. You can check the contents of incoming faxes and print only those you need to print, by which you can reduce the printing cost.

Tips
  • The compulsory memory RX function cannot be used together with the following functions.
  • TSI User Box, PC-Fax RX, Forward TX
  • When using two lines, you can select [Fax Settings] - [TX/RX Settings] - [Individual Receiving Line Setup] in the administrator mode to enable the Memory RX function for each line.
  1. In the administrator mode, select [Fax Settings] - [Function Settings] - [RX Data Operation Settings] - [Memory RX Setting], then click [OK].
  2. At [Memory RX Setting], configure the following settings.
    SettingsDescription
    [Fax Line 1]/[Fax Line 2]
    When using two lines, select a line to assign the Memory RX function to.
    This option is available when a fax can be received for each line in the two-line mode.
    [OFF] is specified by default.
    [Memory RX User Box Password]
    Enter the password to restrict accesses to the Memory RX User Box (using up to eight digits).
    To enter (change) the password, select the [Password is changed.] check box, then enter a new password.