HomeCopyPaper Alignment Plate Settings
To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [Paper Alignment Plate Settings]

If paper is not discharged with the edges aligned, use this option to adjust the effective width of the paper alignment plate for making discharged paper stored neatly.

SettingsDescription
[ Alignment Plate Position (Back)] / [Alignment Plate Position (Front)]
Select the paper alignment plate to adjust the position.
[Adjust Value]
Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-] and [+].
[0.0 mm] is specified by default.
Tips
  • This adjustment is possible when the Finisher FS-533 is installed.