HomeCopySSL/Port Settings
To display:
  • [Utility]
    • [Administrator Settings]
      • [System Connection]
        • [OpenAPI Settings]
          • [SSL/Port Settings]

Configure the OpenAPI communication port and SSL communication settings.

SettingsDescription
[SSL Setting]
Specify whether to use the SSL for communication or not.
  • [Non-SSL Only]: Only non-SSL communication is allowed.
  • [SSL Only]: Only SSL communication is allowed.
  • [SSL/Non-SSL]: Both SSL communication and non-SSL communication are allowed.
[Non-SSL Only] is specified by default.
[Port No.]
If necessary, change the OpenAPI communication port number.
Normally, you can use the original port number.
[50001] is specified by default.
[Port Number (SSL)]
If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[50003] is specified by default.
[Client Certificate]
Select whether to request a certificate from clients that connect to this machine. To authenticate clients, select [Enable].
[Disable] is specified by default.
[Certificate Verification Level Settings]
To validate the certificate during SSL communication, select items to be verified.
  • [Expiration Date]: Confirm whether the certificate is within the validity period. [Confirm] is specified by default.
  • [Key Usage]: Confirm whether the certificate is used according to the intended purpose approved by the certificate issuer. [Do Not Confirm] is specified by default.
  • [Chain]: Confirm whether there is a problem in the certificate chain (certificate path). The chain is validated by referencing the external certificates managed on this machine. [Do Not Confirm] is specified by default.
  • [Expiration Date Confirmation]: Confirm whether the certificate has expired. [Do Not Confirm] is specified by default.
  • [CN]: Confirm whether CN (Common Name) of the certificate matches the server address. [Do Not Confirm] is specified by default.