HomeCopyExpert Adjustment
To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]

Specify this setting if the color tone of print image, staple, hole-punch, and folding positions are changed. You can adjust various settings such as correction of printed image, adjustment of staple, hole-punch, and folding positions.

SettingsDescription
[AE Level Adjustment]
Adjust the AE (Auto Exposure) level.
For details, refer to Here.
[Printer Adjustment]
Adjust the print start position and defective print images.
For details, refer to Here.
[Finisher Adjustment]
Adjust the staple, punch or fold position.
For details, refer to Here.
[Density Adjustment]
Adjust the density of images that are printed on thick paper, OHP transparencies, or envelops for each paper type and print color.
For details, refer to Here.
[Image Stabilization]
Correct the misalignment or tilt of scanning area caused by changes in the temperature or humidity in the machine to ensure high quality printing.
For details, refer to Here.
[Paper Separation Adjustment]
Adjust the paper separation position on each side of paper for 2-sided printing.
For details, refer to Here.
[Color Registration Adjust]
Adjust the print position with respect to each color if color shifts are detected in the print result.
For details, refer to Here.
[Gradation Adjustment]
Adjust gradation when reproduction quality of the printed image is degraded.
For details, refer to Here.
[Scanner Area]
Adjust the scan range of the scanner. For details, contact your service representative.
[ADF Adjustment]
Make adjustments for scanning images in the ADF. For details, contact your service representative.
[Line Detection]
Set this option for the dirt detection level for the Slit Scan Glass and cleaning of the Slit Scan Glass.
For details, refer to Here.
[Trail Edge Adjust]
Correct the color misalignment if the trailing edge of the printed image is out of alignment.
For details, refer to Here.
[User Paper Settings]
Register special paper with [User Paper 1] through [User Paper 6]. Settings to configure include Basic Weight and Media Adjustment. For details on displaying this item, contact your service representative.
[Erase Adjustment]
Specify the operation and erase method when erasing the area outside the original by setting [Non-Image Area Erase].
For details, refer to Here.
[PS Designer Settings]
Specify whether to reproduce the colors in the original strictly as they are when printing it using a PS driver from your computer.
For details, refer to Here.