HomeFaxMulti Line Settings
To display:
  • [Utility]
    • [Administrator Settings]
      • [Fax Settings]
        • [Multi Line Settings]

Set how you want to use a second line if any.

SettingsDescription
[Line Parameter Setting]
Configure your environment for using fax functions in multiple lines.
  • [Dialing Method]: Select the line type according to your environment.
  • [Number of RX Call Rings]: If necessary, change the number of times the phone rings before automatically receiving a fax.
    [2 x] is specified by default.
  • [Line Monitor Sound]: Select whether to play sounds on the telephone line from speakers during fax communication.
    [OFF] is specified by default.
[Function Settings]
Enable or disable functions that are used for multiple lines.
  • [PC-Fax TX Line Setting]: Select the line used for PC-Fax TX. If [No Selection] is selected, either line, whichever is not busy, is used for transmission.
    [No Selection] is specified by default.
[Multi Line Settings]
Select one of [TX Only], [RX Only], and [TX and RX] as the multi line usage.
[TX and RX] is specified by default.
[Sender Fax No.]
Enter the fax number for the multiple lines (a number containing up to 20 digits, with available symbols being #, *, + and space).
The fax number you entered is printed as Header Position.