Home>Print>Available Operations in the Finish Tab

Available Operations in the [Finish] Tab

In the [Finish] tab, you can configure settings for the finish of printouts.

Settings	Description
[Staple]	Select this check box to staple the printed sheets. In addition, specify the number and positions of staples.
[Center Staple and Fold]	Select this check box to staple the printed sheets in two positions in the center. Use this option when you have set [Print Type] to [Booklet] in the [Layout] tab.
[Punch]	Select this check box to make punch holes (binder holes) in the printed sheets. In addition, specify the number and positions of punch holes.
[Fold]	Select this check box to fold the printed sheets. In addition, select the folding mode.
[Page Fold Setting]	When you have selected [Half-Fold(By Sheet)] or [Tri-Fold(By Sheet)] in [Fold], specify the number of pages to be folded at one time.
[Output Tray]	Select the tray to which the printed sheets are output.
[Paper Arrangement]	Select whether to adjust the binding position on two-sided printed sheets collectively after all data items are received or sequentially each time a data item is received. [Prioritize Arranging Papers]: Paper arrangement is performed once after all data items are received. All pages are adjusted under the same conditions. [Prioritize Productivity]: Paper arrangement is performed sequentially while printing the pages.

The Finisher is required to use the Staple function.
To use the Center Staple & Fold function:
The Finisher FS-534 and Saddle Stitcher SD-511 are required.
The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for bizhub C554).
To use the Punch function:
the Finisher FS-534 and Punch Kit PK-520, or the Finisher FS-533 and Punch Kit PK-519 are required.
The Finisher FS-535 and Punch Kit PK-521, or the Z Folding Unit ZU-606 are required (bizhub C554 only).
To use the Half-Fold function in [Fold]:
The Finisher FS-534 and Saddle Stitcher SD-511 are required.
The Finisher FS-535 and Saddle Stitcher SD-512 are required (bizhub C554 only).
To use the Tri-Fold function in [Fold]:
The Finisher FS-534 and Saddle Stitcher SD-511 are required.
The Finisher FS-535 and Saddle Stitcher SD-512 are required (bizhub C554 only).
To use the Z-Fold function in [Fold]:
the Finisher FS-535 and Z Folding Unit ZU-606 are required (bizhub C554 only).
To use Z-Fold of [Fold], specify the paper size described at the setting you selected from the drop-down list ([Z-Fold (A3, B4, 11 17, 8K)], [Z-Fold (8 1/2 14)]) at "Paper Size" of the application software or printer driver.