Specifying the time-out time by interface
Change the time-out time to limit a communication between this machine and the computer if necessary. You can change the time-out time to limit communications via a network and USB respectively.
In the administrator mode, select [Print Setting] - [Interface Setting], then configure the following settings.
Settings | Description |
|---|---|
[Network Timeout] | When this machine is connected via a network to the computer, change the communication time-out time if necessary. [60] sec. is specified by default. |
[USB Timeout] | When this machine is connected via a USB device to the computer, change the communication time-out time if necessary. [60] sec. is specified by default. |