How to Send

Load the original.

Tap [Scan/Fax].

Specify the size of the original to be scanned.

The size of the original can be specified in [Scan Size] (default: [8-1/2 11] (inch area)/[A4] (centimeter area)). If you fail to set the original size correctly, the image may be cut off.

Configure Scan option settings as necessary.

For details on configuring option settings, refer to the respective columns of the following table.

Select [Direct Input] - [Scan Server].

When sending data via a scan server, you cannot send data to other destinations simultaneously or use a fax/scan program.

Select a scan process.

A scan process is used to automate a preset scanning workflow such as a distribution destination from a scan server. This is created by the Windows Server 2008 R2/Server 2012/Server 2012 R2 application, and registered in Active Directory.

Up to 50 scan processes can be obtained. However, multiple scan processes cannot be selected as destinations.

Tapping [Search Again] updates the scan process list.

Tapping [Detail] displays the details of the selected scan process.

By tapping [Change Setting], you can change option settings such as [Color] and [Scan Size].

Tap [Start].

Transmission begins.

However, transmission fails if no scan process is selected or no destination is set to a scan process.