Checking the Name and Function of each Part in this Machine
Front
No. | Name | Description |
|---|---|---|
1 | Control Panel | Used to configure various settings in this machine. |
2 | Stylus Pen | Used to select a menu on the Touch Panel, or enter characters. |
3 | USB Port (Type A) USB2.0/1.1 | Used to connect an external memory unit (USB memory unit) to this machine. |
4 | Right Door | Open this door to clear a paper jam. |
5 | Right Door Release Lever | Used to lock the Right Door. |
6 | Bypass Tray | Used to print data on irregularly size paper, thick paper, transparencies, postcards (4 The Bypass Tray can hold up to 150 sheets of plain paper, 20 sheets of Thick 1, 20 sheets of Thick 1+, 20 sheets of Thick 2, 20 sheets of Thick 3, 20 sheets of Thick 4, 20 sheets of transparency, 20 sheets of postcards (4 |
7 | Paper-Empty Indicator | Flashes or lights up to indicate the remaining paper on the tray. For details, refer to Here. |
8 | Tray1, Tray2 | Allows you to load up to 500 sheets. These trays can hold up to 150 sheets respectively of Thick 1, Thick 1+, Thick 2, and Thick 3. |
9 | Front Door | Open this door to replace the Toner Cartridge, Waste Toner Box, or Drum Unit, and to clean the Print Head Glass. |
10 | Data Indicator | Flashes or lights up to indicate the data receiving status on this machine. For details, refer to Here. |
11 | Output Tray | Outputs printed pages. |
12 | Status Indicator | Flashes white during printing. For details, refer to Here. |
13 | Power key | Press this key to switch to the Power Save mode. During the normal operation, the key lights up blue. During the power save mode, the key flashes blue or lights up orange. |
14 | Warning Indicator | Flashes or lights up to indicate that a problem has occurred in this machine. For details, refer to Here. |
Side/rear
No. | Name | Description |
|---|---|---|
1 | Power Cord | Used to supply power to this machine. |
2 | USB Port (Type A) USB2.0/1.1 | Used to connect the Fax Kit (line 1) cable. |
3 | USB Port (Type A) USB2.0/1.1 | Used to connect the Fax Kit (line 2) cable. |
4 | USB Port (Type A) USB2.0/1.1 | Used to connect the Authentication Unit or Wireless LAN Interface Kit. |
5 | USB Port (Type A) USB2.0/1.1 | Used to connect the Authentication Unit or Wireless LAN Interface Kit. |
6 | Network Connector (10Base-T/100Base-TX/1000Base-T) | Connect to this port when using this machine as a network printer or network scanner. |
7 | USB Port (Type B) USB2.0/1.1 | Connect to this port when using this machine as a USB-connected printer. |
Inside
No. | Name | Description |
|---|---|---|
1 | Original Glass | Used to load the original. |
2 | Fusing Unit Cover Lever | Open this lever when clearing a paper jam in the fusing unit. |
3 | Fusing Unit | Used to fuse toner to paper using heat and pressure. |
4 | Auto Duplex Unit | Used to reverse paper when performing 2-sided printing. |
5 | Drum Unit | Used to create a print image. |
6 | Lock Release Tab | Used to remove the Drum Unit. |
7 | Waste Toner Box | Used to collect used waste toners. |
8 | Printhead Cleaner | Used to clean the surface of the Print Head Glass when the Drum Unit is being replaced. |
9 | Main Power Switch | Press this switch to turn the machine on or off. |
10 | Toner Cartridge | This machine provides Toner Cartridge in four colors: cyan (C), magenta (M), yellow (Y), and black (K). A full-color image is created by combining the four toner colors. |
11 | Slit Scan Glass | Used to scan an original image when using the ADF. |
12 | Original Scale | Load the original along this scale. This scale is also used to measure the size of the loaded original. |