HomeAdvanced FunctionConfiguring Settings on the Control Panel of the MFP

Configuring Settings on the Control Panel of the MFP

Register MFPs to be operated in a universal print group using the Control Panel of the MFP. Up to 10 MFPs can be registered, including the MFP (this machine) to be configured.

Configure the following settings on all MFPs that make up a universal print group.

  1. Tap [Utility] - [Administrator Settings] - [System Connection] - [Universal Print Settings] - [Universal Print Group Setting].

  2. Tap [Registered Machine2] to [Registered Machine10].

  3. Select the method for specifying a registered MFP ([Input Host Name], [IPv4 Address Input], or [IPv6 Address Input]), specify MFPs to be registered in a universal print group, then click [OK].

  • If universal print group settings are configured using LK-114_SetupTool, this step is not required.

  • This method for specifying registered MFPs should be common to all MFPs that compose a universal print group.

  • To register an MFP with the host name, specify only the host name, excluding the first dot ''.'' and after in the domain name (example: UniversalPrint1.test.local). A host name cannot be duplicated.

  • A universal print group cannot be structured over WAN.

  • To compose a universal print group of different models, you need to permit the Quick Authentication for Printing function. For details on how to permit the Quick Authentication for Printing function, refer to Here.