HomeScanHow to Send

How to Send

  1. Load the original.

  2. Display the Scan/Fax screen of classic style.

    • For details on how to display the screen, refer to Here.

  3. Specify [Application] - [App] - [E-Mail Encryption] and [Digital Signature].

    • To apply E-mail encryption, set [E-Mail Encryption] to [ON].

    • To add a digital signature, set [Digital Signature] to [ON].

    • If you cannot change the [ON] or [OFF] state in [Digital Signature], it is assumed that whether or not a digital signature is always added is specified by the administrator.

  4. Specify the E-mail address of the destination.

    • To encrypt an E-mail, select an E-mail address with the certificate registered. An E-mail address with the certificate registered is marked by the key-shaped icon.

    • Up to 10 E-mails can be broadcast.

  5. Use the Start key to start transmission.

    • If necessary, tap [Check Setting] before transmission, and check the specified destination and settings.

    • Using the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.