* Enter the name of the utility key. You can search descriptions of utility keys.
Centering (Duplex 2nd Side)
To display: [Utility][Expert Adjustment][Printer Adjustment][Centering (Duplex 2nd Side)]
Adjust the print start position at the left edge of the paper relative to the paper discharge direction for printing the back side in 2-sided printing.
Use the Start key to print a test pattern. Check the test pattern, then, if necessary, repeatedly adjust so that the margin between the left edge and the print starting position is 3/16 inches (4.2 mm) ( 1/32 inches (
0.5 mm)).
Setting | Description |
---|---|
[Select Tray] | Select a paper tray that is used to adjust the start position for printing. |
[Adjust Value] | Enter the adjustment value between -3.0 mm and 3.0 mm (default: [0.0 mm]). |

Only the plain paper of 8-1/2
11
(A4
) can be used for adjusting the Bypass Tray.